Skip to content

1/10 SCALE HORTEN IX HO-229 RC MODEL JET

20220727_155858.jpg 1/10 SCALE HORTEN IX HO-229 RC MODEL JET
We wag RS # oe tellin: 1/10 SCALE HORTEN IX HO-229 RC MODEL JET
20220727_160020.jpg 1/10 SCALE HORTEN IX HO-229 RC MODEL JET
i 4 : Piece Oe ET 1/10 SCALE HORTEN IX HO-229 RC MODEL JET
20220718_231344.jpg 1/10 SCALE HORTEN IX HO-229 RC MODEL JET
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 23.9k views
  • 72 likes
  • 83 downloads
  • 2 collections
  • 1 comment
License
3D design format
ZIP Folder details Close
  • EDF Horten IX (Ho-229) Assembly Guide.zip
    • EDF Horten IX (Ho-229) Assembly Guide.pdf
  • Ho IX EDF Gcodes.zip
    • Canopy_Screen_PETG.gcode
    • Canopy1_ABS.gcode
    • Canopy2_ABS.gcode
    • config_ABS.ini
    • config_LWPLA.ini
    • config_PLA.ini
    • Drag_Rudder_Top _And_Bottom_PLA.gcode
    • EDF_Clamps_ABS.gcode
    • Elevon1_1_Port_LWPLA.gcode
    • Elevon1_1_Stbd_LWPLA.gcode
    • Elevon1_2_Port_LWPLA.gcode
    • Elevon1_2_Stbd_LWPLA.gcode
    • Elevon1_3_Port_LWPLA.gcode
    • Elevon1_3_Stbd_LWPLA.gcode
    • Elevon2_1_Port_LWPLA.gcode
    • Elevon2_1_Stbd_LWPLA.gcode
    • Elevon2_2_Port_LWPLA.gcode
    • Elevon2_2_Stbd_LWPLA.gcode
    • ESC_Strap_and_Nose_Steering_Guide_ABS.gcode
    • Fin_ABS.gcode
    • Fuselage1_LWPLA.gcode
    • Fuselage2_Center_LWPLA.gcode
    • Fuselage2_Port_LWPLA.gcode
    • Fuselage2_Stbd_LWPLA.gcode
    • Fuselage3_Port_ABS.gcode
    • Fuselage3_Stbd_ABS.gcode
    • Fuselage4_Port_ABS.gcode
    • Fuselage4_Stbd_ABS.gcode
    • Fuselage5_Port_ABS.gcode
    • Fuselage5_Stbd_ABS.gcode
    • Fuselage6_Port_ABS.gcode
    • Fuselage6_Stbd_ABS.gcode
    • Gear_Wells_ABS.gcode
    • Homing_Radar_ABS.gcode
    • Main_Gear_Door_ABS.gcode
    • Nose_Bay_Cap1_and_2_ABS.gcode
    • Nose_Bay1_and_2_ABS.gcode
    • Rudder_Cover_Top_And_Bottom_ABS.gcode
    • Rx_Tray_ABS.gcode
    • Servo_Hatch1_ABS.gcode
    • Servo_Hatch2_ABS.gcode
    • Wing1_Port_LWPLA.gcode
    • Wing1_Stbd_LWPLA.gcode
    • Wing2_Port_ABS.gcode
    • Wing2_Stbd_ABS.gcode
    • Wing3_Port_ABS.gcode
    • Wing3_Stbd_ABS.gcode
    • Wing4_Port_ABS.gcode
    • Wing4_Stbd_ABS.gcode
    • Wing5_Port_Stbd_ABS.gcode
    • Wing6_And_Wing8_Cap_ABS.gcode
    • Wing6_Port_LWPLA.gcode
    • Wing6_Stbd_LWPLA.gcode
    • Wing7_Port_LWPLA.gcode
    • Wing7_Stbd_LWPLA.gcode
    • Wing8_Port_ABS.gcode
    • Wing8_Stbd_ABS.gcode
  • Horten IX EDF STLs.zip
    • Fuselage/Canopy_Screen.STL
    • Fuselage/Canopy1.STL
    • Fuselage/Canopy2.STL
    • Fuselage/EDF_Clamp_Port.STL
    • Fuselage/EDF_Clamp_Stbd.stl
    • Fuselage/ESC_Strap.stl
    • Fuselage/Fin.STL
    • Fuselage/Fuselage1.STL
    • Fuselage/Fuselage2_Center.STL
    • Fuselage/Fuselage2_Port.STL
    • Fuselage/Fuselage2_Stbd.STL
    • Fuselage/Fuselage3_Port.STL
    • Fuselage/Fuselage3_Stbd.STL
    • Fuselage/Fuselage4_Port.STL
    • Fuselage/Fuselage4_Stbd.STL
    • Fuselage/Fuselage5_Port.STL
    • Fuselage/Fuselage5_Stbd.STL
    • Fuselage/Fuselage6_Port.STL
    • Fuselage/Fuselage6_Port_Freewing.STL
    • Fuselage/Fuselage6_Stbd.STL
    • Fuselage/Fuselage6_Stbd_Freewing.STL
    • Fuselage/Gear_Well_Port.STL
    • Fuselage/Gear_Well_Stbd.STL
    • Fuselage/Homing_Radar.STL
    • Fuselage/Main_Gear_Door.STL
    • Fuselage/Nose_Bay_Cap1.STL
    • Fuselage/Nose_Bay_Cap2.STL
    • Fuselage/Nose_Bay1.STL
    • Fuselage/Nose_Bay2.STL
    • Fuselage/Nose_Steering_Guide.STL
    • Fuselage/Rx_Tray.STL
    • Fuselage/Rx_Tray_R6014FS.STL
    • Fuselage-No Supports/Canopy1_ns.stl
    • Fuselage-No Supports/Canopy2_ns.stl
    • Fuselage-No Supports/Fuselage1_ns.stl
    • Fuselage-No Supports/Fuselage2_Center_ns.stl
    • Fuselage-No Supports/Fuselage2_Port_ns.stl
    • Fuselage-No Supports/Fuselage2_Stbd_ns.stl
    • Fuselage-No Supports/Fuselage3_Port_ns.STL
    • Fuselage-No Supports/Fuselage3_Stbd_ns.STL
    • Fuselage-No Supports/Fuselage4_Port_ns.STL
    • Fuselage-No Supports/Fuselage4_Stbd_ns.STL
    • Fuselage-No Supports/Fuselage5_Port_ns.STL
    • Fuselage-No Supports/Fuselage5_Stbd_ns.STL
    • Fuselage-No Supports/Fuselage6_Port_Freewing_ns.STL
    • Fuselage-No Supports/Fuselage6_Port_ns.STL
    • Fuselage-No Supports/Fuselage6_Stbd_Freewing_ns.STL
    • Fuselage-No Supports/Fuselage6_Stbd_ns.STL
    • Fuselage-No Supports/Main_Gear_Door_ns.STL
    • Fuselage-No Supports/Nose_Bay1_ns.stl
    • Fuselage-No Supports/Nose_Bay2_ns.stl
    • Nose Gear/Nose_Fork.STL
    • Nose Gear/Nose_Hub.STL
    • Nose Gear/Nose_Strut.STL
    • Nose Gear/Nose_Tire.STL
    • Optional/Belly_Lander_Plug_Port.stl
    • Optional/Belly_Lander_Plug_Stbd.STL
    • Optional/Main_Gear_Inner_Door_Stbd.STL
    • Optional/Servo_Fin.STL
    • Optional/Servo_Hatch1_Fin.STL
    • Wing/Drag_Rudder_Bottom.STL
    • Wing/Drag_Rudder_Top.STL
    • Wing/Elevon1_1_Port.STL
    • Wing/Elevon1_1_Stbd.STL
    • Wing/Elevon1_2_Port.STL
    • Wing/Elevon1_2_Stbd.STL
    • Wing/Elevon1_3_Port.STL
    • Wing/Elevon1_3_Stbd.STL
    • Wing/Elevon2_1_Port.STL
    • Wing/Elevon2_1_Stbd.STL
    • Wing/Elevon2_2_Port.STL
    • Wing/Elevon2_2_Stbd.STL
    • Wing/Rudder_Cover_Bottom.STL
    • Wing/Rudder_Cover_Top.STL
    • Wing/Servo_Hatch1.STL
    • Wing/Servo_Hatch2.STL
    • Wing/Wing1_Port.STL
    • Wing/Wing1_Stbd.STL
    • Wing/Wing2_Port.STL
    • Wing/Wing2_Stbd.STL
    • Wing/Wing3_Port.STL
    • Wing/Wing3_Stbd.STL
    • Wing/Wing4_Port.STL
    • Wing/Wing4_Stbd.STL
    • Wing/Wing5.STL
    • Wing/Wing6_Cap.STL
    • Wing/Wing6_Port.STL
    • Wing/Wing6_Stbd.STL
    • Wing/Wing7_Port.STL
    • Wing/Wing7_Stbd.STL
    • Wing/WIng8_Cap.STL
    • Wing/Wing8_Port.STL
    • Wing/Wing8_Stbd.STL
    • Wing-No Supports/Elevon1_2_Port_ns.stl
    • Wing-No Supports/Elevon1_2_Stbd_ns.stl
    • Wing-No Supports/Elevon1_3_Port_ns.stl
    • Wing-No Supports/Elevon1_3_Stbd_ns.stl
    • Wing-No Supports/Elevon2_1_Port_ns.stl
    • Wing-No Supports/Elevon2_1_Stbd_ns.stl
    • Wing-No Supports/Servo_Hatch1_ns.stl
    • Wing-No Supports/Servo_Hatch2_ns.stl
    • Wing-No Supports/Wing1_Port_ns.stl
    • Wing-No Supports/Wing1_Stbd_ns.stl
    • Wing-No Supports/Wing2_Port_ns.stl
    • Wing-No Supports/Wing2_Stbd_ns.stl
    • Wing-No Supports/Wing3_Port_ns.stl
    • Wing-No Supports/Wing3_Stbd_ns.stl
    • Wing-No Supports/Wing4_Port_ns.stl
    • Wing-No Supports/Wing4_Stbd_ns.stl
    • Wing-No Supports/Wing8_Port_ns.stl
    • Wing-No Supports/Wing8_Stbd_ns.stl

Learn more about the formats
Last update 2023-03-07 at 03:51
Publication date 2022-07-24 at 20:35
Design number 792441
DirtyDee

DirtyDee

3D printer file info

3D model description

This 1/10 scale Horten IX (Ho-229) was designed to achieve a high level of scale fidelity, including panel lines and raised panel detailing throughout the airframe. Unlike many other Horten IX EDF models, the use of clear thrust tube extensions is not required for proper flight behavior and instead, utilizes a small fin on the bottom of the tail to provide added stability.

Build Volume Requirements: 220mm x 220mm x 200mm or 205x250x200. This was designed on the Prusa Mk2S

Wingspan: 1680mm(66 in)
Length: 749mm(29.4 in)
Wing Area:51.6 dm2(800 in2)

Full download contains both STLs and Gcodes. The Gcodes are specific for the Prusa i3 and for ABS and LW-PLA as the primary materials. Configuration files are included for ABS, LW-PLA, and PLA.

Free assembly manual can be downloaded from my profile, via the free test pieces.
https://cults3d.com/en/3d-model/game/1-10-scale-horten-ix-ho-229-rc-model-jet-test-files-and-manual

Flight Compilation Video:
https://youtu.be/qpbO7p-Qf48

Short Take-Off and XRP Fans:
https://youtu.be/dAdAIYLvW48

RCGroups Thread:
https://www.rcgroups.com/forums/showthread.php?4079805-1-10-Scale-Horten-IX-Ho-229-%281680mm-Wingspan-2x50mm-EDF%29

Rev1: 2022-12-27
Updated Assembly Manual. Added Files for experimental scale nose strut and tire. Nose_Bay1 STL updated for extra clearance to fit experimental strut.

Rev2: 2023-03-06
Added additional Fuselag6 STLs with bolt patter that matches Freewing nose retract unit for the T-33. SKU: ET8202.

3D printing settings

Refer to PDF manual included in the download, or from the provided links (free downloads). Download includes Prusa Gcodes.

Note that the included Gcodes are made for ABS and some LW-PLA parts. If you want to use the packaged Gcodes for PLA, you can tweak the Gcode files in a text editor to lower the nozzle temp to ~230 and Bed temp to ~60 deg F.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.