STRANGER THINGS - HELLFIRE CLUB DICE/PENCIL BOX

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS:

https://www.patreon.com/PA1_MAKER

Here's a super simple print! No instructions, no supports, all parts already placed in the right orientation! Just print and have fun!

Only one thing to do for an optimum result: For the cover you'll have to do a color change at the appropriate layer for the text. Simple as this.

IMPORTANT NOTE; Use a filament with a bit of flexibility in it. PLA+ or PETG were my choice for the precedent boxes (star wars ones). For this one i used matte PLA, its less flexible and the pin for locking the cover in place is brittle.

Box prints really well with a 0.3 layer height for fast print. However, a 0.2 layer height will give you smoother result.

The text all around is already configured to be easily printable. It should come out crisp and clean, don't worry for the overhangs. Just be sure your bridge settings are good and activated.

I recommend 3 walls (3 shells) with a very basic infill (10% is way enough!) for the main box and 2 walls with the same infill for the cover. This will help the cover flex a bit.

IMPORTANT NOTE; Use a filament with a bit of flexibility in it. PLA+ or PETG were my choice for the precedent boxes (star wars ones). For this one i used matte PLA, its less flexible and the pin for locking the cover in place is brittle.

The box is also perfect for pencils or any other things you would like to organize.

I really hope you like it! If you have any questions you can send me a message here or on my facebook page.

Follow my patreon for more exclusive models every month!