Barbarian Axe Dice Tower - SUPPORT FREE!
$6.99 Barbarian Axe Dice Tower - SUPPORT FREE!
3D
Published 2022-07-29T21:02:22+00:00
From FatesEnd3, you can become a Furhaven Backer here: Furhaven Late Backer Store
Barbarian's Axe Dice Tower!
I created this dice tower for my Kickstarter campaign: Fates End 3: Furhaven! This dice tower is designed to work with typical 16mm (based on D6) dice sets. The D20 in that set is 20mm. If you want to print this dice tower smaller, you can print it at 60% for tiny 10mm dice sets.
*Non-commercial License. Please don’t sell prints of this file, you’re welcome to give them away as gifts though.
*Only Merchants are permitted to sell prints of these files. If interested, please check the MERCHANT LISENCE section of the Kickstarter campaign.
No Supports! Print at 100% for rolling regular-sized dice sets. (16mm based on the D6.)
*Note: The DH labeled tray is a Device Holder Tray, so you can prop your electronic up when you are playing!
For the Magnets, we use 5mm x 2mm magnets.
This is the set we're using (if sold out, just use any magnet that's 5mm x 2mm): https://www.amazon.com/gp/product/B078BGGYH8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
The Peg.stl is for those who do not want to use magnets. Print & glue Peg.stl in place of magnets.
*My creations are never intended for resell (even prints), unless you're a FatesEnd Merchant. Please don't distribute my models, I've dedicated hours to making them great for you or for a gift to those you love!
| Date published | 29/07/2022 |
| Price | $6.99 |
| Support Free | YES |
hole is too small...or how to fix axe? printed in 100% scale both