Geoffs XT60 Cover - Sheath 3D print model

XT60 Cover - I've produced 2 versions, for small 1.5mm diameter wires & also 2mm wires. Unlike some XT60 tapered covers, my XT60 cover also works with BIG very large wires (up to 5mm), just drill to required size.

It is a very tight press fit (multigrips) with my printer & 0.4mm nozzle with .25mm layer height, if it isn't on your print, just scale up/down slightly until it fits.

Printed on ABS for use outdoors, but anything will work - PLA/PETG/ASA/TPU