AK47 headphone stand, ak themed headphone stand (prints without supports) ak74

Headphone stand with two AK 74s supporting an ammo crate with ammo modeled inside. The stand prints without supports although the bottoms of the trigger guards need to be printed on their own and attached with glue.
This is a fairly random idea that I really wanted to make and it took me some time to get to a point where it prints reliably without supports although it still needs a raft for proper bed adhesion.
I am quite happy with its look and I think it will look even better painted or printed in grey.

There are two models of the stand included, one with a closed ammo crate and another with an open ammo crate where the ammo is visible. There is also a lid for the open ammo crate and the bottoms for each trigger guards.

The model is printable at any scale as long as you use a brim or raft of some kind to prevent a split from the print bed or warping.
I HIGHLY recommend printing at the scale the files are already at and definitely not smaller.

You WILL NEED a print bed of 220x220 or more, 220x220 is the size of ender3 printers.

Although the model prints without supports it may be better to add some if you don't mind the clean up.

scale
Is best printed at 100% scale or more

layer height
best printed at 0.16mm

infill
15% or more

temp
195 and 60 for the bed