AESERA23 – Seraphim: Dais Secret Chambers
$5.00 AESERA23 – Seraphim: Dais Secret Chambers
Published 2022-08-02T09:26:31+00:00
Check out our patreon where we publish our patron requests and other awesome sets like this one.
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This set was worked up by Marc Weatherhogg as the latest in a long line of secret chamber options. Marc is a talented engineer of tiles and one of the kindest souls you could ever meet. Marc strives to help others constantly, to improve their games and gaming experience, and to lift the burdens of those who enjoy the privilege of calling him friend. Marc, we thank you for another banger of a set!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 02/08/2022 |
Price | $5.00 |
Support Free | YES |