Skip to content

Crawler C23 “Workhorse” (Oshkosh MTVR replica) - 1/10 RC Body

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.4k views
  • 15 likes
  • 27 downloads
  • 1 collection
License
3D design format
PDF and ZIP Folder details Close
  • ahead RC Crawler C23 Workhorse Manual.pdf
  • ahead RC Crawler C23 Workhorse.zip
    • Cab/cab cut cab.stl
    • Cab/cab cut roof.stl
    • Cab/cab joiner left.stl
    • Cab/cab joiner right.stl
    • Cab/cab uncut.stl
    • Doors/door handle (1).stl
    • Doors/door handle (2).stl
    • Doors/door hinge left alt. version.stl
    • Doors/door hinge left.stl
    • Doors/door hinge right alt. version.stl
    • Doors/door hinge right.stl
    • Doors/door left alt. version.stl
    • Doors/door left.stl
    • Doors/door right alt. version.stl
    • Doors/door right.stl
    • DXF files/door window.dxf
    • DXF files/rear window.dxf
    • DXF files/windscreen.dxf
    • Fenders/fender cover left.stl
    • Fenders/fender cover right.stl
    • Fenders/fender left.stl
    • Fenders/fender mount right 1.stl
    • Fenders/fender mount left 1.stl
    • Fenders/fender mount left 2.stl
    • Fenders/fender mount right 2.stl
    • Fenders/fender right.stl
    • Interior/dashboard.stl
    • Interior/steering wheel base.stl
    • Interior/steering wheel.stl
    • Lights/big orange left (1).stl
    • Lights/big orange left (2).stl
    • Lights/big orange right (1).stl
    • Lights/big orange right (2).stl
    • Lights/cab light mock (1).stl
    • Lights/cab light mock (2).stl
    • Lights/cab light mock (3).stl
    • Lights/cab light mock (4).stl
    • Lights/cab light mock (5).stl
    • Lights/headlight bucket left.stl
    • Lights/headlight bucket right.stl
    • Lights/headlight lens (1).stl
    • Lights/headlight lens (2).stl
    • Lights/small orange (1).stl
    • Lights/small orange (2).stl
    • Lights/small orange (3).stl
    • Lights/small orange (4).stl
    • mirror/mirror (1).stl
    • mirror/mirror (2).stl
    • mirror/mirror arm left.stl
    • mirror/mirror arm right.stl
    • mirror/mirror mount left.stl
    • mirror/mirror mount lower (1).stl
    • mirror/mirror mount lower (2).stl
    • mirror/mirror mount right.stl
    • ahead RC Crawler C23 Workhorse manual.pdf
    • accessories/2.2 wheel hubs.stl
    • accessories/cab side bolt (1).stl
    • accessories/cab side bolt (2).stl
    • accessories/cab side bolt (3).stl
    • accessories/cab side bolt (4).stl
    • accessories/cab side bolt (5).stl
    • accessories/cab side bolt (6).stl
    • accessories/cab side bolt (7).stl
    • accessories/cab side bolt (8).stl
    • accessories/handle hold left.stl
    • accessories/handle hold right.stl
    • accessories/handlebar (1).stl
    • accessories/handlebar (2).stl
    • accessories/non_threaded_wiper (1).stl
    • accessories/non_threaded_wiper (2).stl
    • accessories/windshield hinge (1).stl
    • accessories/windshield hinge (2).stl
    • Battery Box/(alt ver)compartment chamfered bottom.stl
    • Battery Box/(alt ver)compartment.stl
    • Battery Box/chassis mount.stl
    • Battery Box/compartment chamfered bottom.stl
    • Battery Box/compartment.stl
    • Battery Box/lid flat.stl
    • Battery Box/lid.stl
    • Battery Box/max batt size 168Lx52Wx55H (mm).txt
    • Body Mounts/body mount 8mm spacer left.stl
    • Body Mounts/body mount 8mm spacer right.stl
    • Body Mounts/body mount left.stl
    • Body Mounts/body mount right.stl
    • Bonnet and grille/cowl.stl
    • Bonnet and grille/grille alt. version.stl
    • Bonnet and grille/grille mesh.stl
    • Bonnet and grille/grille opening.stl
    • Bonnet and grille/grille.stl
    • Bonnet and grille/magnet mount.stl
    • Bonnet and grille/radiator.stl
    • Bumper/bumper alt. version.stl
    • Bumper/bumper lens (1).stl
    • Bumper/bumper lens (2).stl
    • Bumper/bumper light bucket left.stl
    • Bumper/bumper light bucket right.stl
    • Bumper/bumper mount 30mm (lowered).stl
    • Bumper/bumper mount 35mm (lowered).stl
    • Bumper/bumper mount 40mm (lowered).stl
    • Bumper/bumper.stl
    • Bumper/Number plate ahead RC.stl
    • Bumper/Number plate blank.stl
    • Bumper/towing eye.stl

Learn more about the formats
Last update 2023-04-01 at 06:48
Publication date 2022-08-06 at 09:09
Design number 805262
ahead_RC

ahead_RC

Template info

3D model description

The C23 “Workhorse” is not your typical farm truck. Want to conquer all types of terrains? This is it. Designed for use with massive 135mm tyres (for 1/10 scale) this truck has more belly and axle ground clearance than even fully kitted out crawlers. Flatbed SOLD SEPARATELY.

Kitted out in this build was a SCX10 iii stretched and modified chassis recycled straight from the Crawler 4320 Dual Cab build we did here: https://cults3d.com/en/3d-model/game/crawler-4320-dc-expedition-cab

The Workhorse is also a multi-purpose vehicle that can be used to haul cargo on and off-road. It can also be configured in 4x4 or 6x6 configuration (maximum 120mm tyre height for use with stock TRX6 chassis/wheelbase), for scouting and towing purposes. In 4x4 configuration it is recommended to use a 420mm wheelbase. It is also recommended to use a tyre to tyre outermost width of 240mm for all wheelbases. Wider tyres or a wider track will allow the truck to be more stable at the cost of the turning circle.
Scale diagrams are shown for mock-up wheelbase setups.

The grille can be swapped out for an alternate version included with the files. The other version has straight horizontal bars going across.

The bonnet can be hard mounted onto the cab for extra rigidity, or it can also be hinge mounted to the bumper as the included magnet mount can hold the bonnet shut. Similarly the doors can also be hinge mounted with the included “alt.” versions for extra realism. The mirrors too are designed to pivot.

LEDs light buckets are included so 5mm and 3mm LEDs can be added to the headlights and fender lights. Body mounting holes are designed for easier mounting without having to do measurements.

The radiator and interior’s dashboard along with the steering wheel are now included and can be bolted on easily without any modifications. 2.2 mock wheel hubs are also included just to add even more realism.

A pair of body mounts and bumper posts are also included. However it most likely needs to be modified to fit different builds.

Bonus battery box (maximum battery size 168Lx52Wx55H) shown in the picture is also included as a thank you!

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

Designed to be printer friendly, the parts come in a variety of included options.

Cab:
- Cab uncut (cab and roof are a 1 piece print. Requires a printer that can print a minimum of 155x210x185mm)
- Cab cut (splits cab and roof into 2 piece print. Requires a printer that can print a minimum of 155x210x165mm)

Doors:
- Mock hinge (lookalike hinges can be mounted, but door cannot be opened)
- Hinge alt. Version (flat sections on mock hinge to allow mounting of real hinges. Please use the appropriate “alt. Version” doors for use with “alt. Version” hinges.

Grille:
- Big mesh grille (grille is opened and shows only the grille mesh)
- Grille alt. Version (grille with bars going across)

Bumper:
- Bumper (wide rectangular bars)
- Bumper alt. Version (Rectangular bars with angled lowers for better clearance)

Some files will need to be printed multiple times, this includes the following:
- Door handle x2
- Big orange (fender lights) x2
- Small orange (fender lights) x4
- Headlight lens x2
- Mock cab lights x5
- Windshield hinge x2
- Cab side bolts x8
- Handlebar x2
- Non threaded wipers x2
- Bumper lens x2
- Mirror x2
- Mirror mount lower x2

A .zip file containing all the print files is also included for convenience. DXF files for the windows are also included.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Should you need any help, please do not hesitate to contact us!

Manufacturing settings

FDM printing:

Requires a printer that can print a minimum volume of: 155x245x165mm.

PLA+ filament
0.3mm layer heights
10% infill density
Supports are necessary

Finished and assembled size:
291*240*218mm (All parts assembled)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.