Wolfcraft Repair Kit 3455100 repair kit

So I have two of these and a while ago one had a broken spring.

It didn't work anymore which is why I came up with this repair kit.

The kit consists of the two printed parts as well as three parts you need from the original body.

It's the little metal plate with the rectangular cutout, the original lever bolt and also the rubber cover.

These parts should be fine even after the clamp doesn't work anymore.

Rubber cover and metal plate go to the top and back of the printed body.

Then the printed lever get's fixed by the bolt.

The fittings are pretty tight, but that's on purpose.

Anyway until now I have only this one broken clamp, so please tell me if these tolerances work for you as well.

Also the fitting on the original rod is very tight.

I intended to let the material set after being mounted and I think it's good now.

It could be slightly easier to move, but it's better than having the body always slip away.

Maybe there's still support left near the rod which hinders it, but anyway it's alright.

So enjoy and I really hope this thing helps you out. :-)

German description:

A spring broke on my clamp and subsequently I couldn't fix anything with it.

Hence this repair kit consisting of the two pressure parts, and three parts from the original clamp.

From the clamp you need the rubber protector, the bolt from the lever and one of the metal plates.

The protector and plate are attached to the top and back of the pressure part and the bolt is used to connect the body and lever.

The hole for the bolt ends in the part to help with positioning.

Intentionally minimize the clearance between the parts.

The metal plate and bolt may fit as tightly as possible anyway.

On the through hole for the strut, I don't know if it's actually that tight or if support structure was left in the part.

It is a tight fit and I prefer that to a clamp that keeps falling off.

I mounted everything and after about a day, the plastic was able to creep to the point where I'm absolutely fine with how it moves.

Of course, since I only have the one bracket, I'm happy to hear feedback on whether the repair kit fits in other cases.

So far, hopefully it helps out one or the other. :-)

-