Black & Decker 20V Dual Zip Tie blade cap

Printed mine with Petg. Not sure how well it works but I will try in the morning....I was being lazy because I don't have anymore trimmer line but I have 1k zip ties.....4 inch zip ties look like they fit with some space to go....8 inch fit snug or perfect but wlll need to be cut down preferably at the same measurement to keep things balanced.

****Added a different version where the zip tie holders arent protruding so are less likely to break when impacting something.....Havent tried the first version yet, I'm gonna go ahead and print the new version.....Was just thinking about it and thought that would be a weak point

08/16/2021: tested 2x and if printed at current orientation the clips break pretty easy while in use. Probably lasted 3 minutes printed in PETG. Third test was printed flipped 90 degrees so the clips needed support and were on the left and right ( not north and south). This version lasted longer than the zip ties. In fact it is still intact. I was using 8 inch ties and in my experience they broke really fast but they work so if you’re going to use this keep a pocket full of ties and maybe a pair of pliers to pull the old ones out. My zip ties fit really snug. The thing is, you have to use the zip ties on grass only, then they last a little longer...any hit against brick, pvc, or a stick is gonna break the ties.

-