Soda Can Terrain Kit
$3.99 Soda Can Terrain Kit
3D
Published 2022-08-15T11:01:25+00:00
The soda can terrain kit will allow you to transform empty soda cans into industrial terrain such as fuel tanks and chemical storage tanks for your 28mm - 35mm tabletop wargames & RPGs. The kit has been designed for support-free printing on FDM printers (some assembly is required).
Soda cans be customized with seven designs of end cap, for the tops and bottoms of your soda cans, including domes, outlets and symbols (radiation, biohazard and flammable). There are also optional fittings, including a fill cap and additional panels which you can add to your cans.
If you don’t have access to any empty soda cans, 3D printable cans are also included with the kit (and with these, you can also create symmetrical tanks).
Please Note: All of the parts included in this kit are also included in all of the A.R.C. Container Transport campaign pledges, along with some additional parts allowing you to combine the kit with the transport to create a tanker.
This kit is designed to accommodate (and has been tested with) the standard UK can sizes of 330ml, 440ml and 500ml. The kit should accommodate cans from other countries if they are similar in size to UK cans, but parts to assemble 3D printed cans are also provided as an alternative option.
Assembly instructions are included with the files.
Suitable for FDM printing without supports.
Dimensions:
- The largest part of the support is 7.1cm x 7.2cm x 0.5cm
- The largest part of the printed cans is 6.7cm x 6.7cm x 7.6cm
| Date published | 15/08/2022 |
| Price | $3.99 |
| Support Free | YES |
Additional test prints of my soda can terrain kit (1/3)