Smartphone articulated mount for mic stand - Soporte articulado smartphone para pie de microfono

Smarphone articulated mount for mic stand. Can be used to read lyrics, sheets, tabs, etc. Multiple positions. The downloadable model does not have any logos or branding.

Articulated smartphone stand for microphone stand. Useful for reading lyrics, sheet music, tablatures, etc. Different positions. The download model does not have any logo or brand unlike the photos of the printed model.

Print all the parts in the position that they are in the files. You can print them with 0.22 or 0.3 layer height. Every part has to be 80% infill as minimum to ensure rigidity (perhaps I recommend to print the bolts with 100% infill since these are going to be the most forced parts) The only parts that need supports are:

AXIS CHANGER

PHONE CLAMP PART 1

PRESS FOR MIC BOLT PROTECTOR

The device uses 2 M5 bolts with nut. Complete the press with some anti-sliding material in contact surfaces (PRESS FOR MIC BODY & PRESS FOR MIC BOLT PROTECTOR)

Print all parts in the position where they are in the files. You can print with 0.22 or 0.3 layer. All parts must have at least 80% infill to ensure rigidity (I recommend printing the screws with 100% infill as they are the parts that will have to withstand the most force).

The only parts that need supports are:

AXIS CHANGER

PHONE CLAMP PART 1

PRESS FOR MIC BOLT PROTECTOR

The device uses 2 M5 screws and nuts. Complete the press with some anti-slip material (I used eva rubber) on the contact surfaces (PRESS FOR MIC BODY & PRESS FOR MIC BOLT PROTECTOR).