Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, consider support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts

Supporting me on Patreon with the lowest tier of $3 will give you access to ALL my paid Cults design too!

Updates

7/10/2023:
- Added Mooneyes variant parts

Description

A generic petrol station for 1/64 scale cars, call it penguin petrol because I like penguins.

Plain version is available too!

The cars I used in the photos are:
- Delorean DMC-12 (Hot Wheels)
- Dom's Dodge Charger ( Tomica)
- Mazda MX5 (Mini GT)
- Land Rover Defender 110 (Mini GT)
- Holden Monaro (Hot Wheels)
- Dodge Charger R/T (Maisto)
- Ford GT 2005 (Matchbox)
- Chevy Corvette C6 ZR1 (Matchbox)
- Hyundai Elantra N (Mini GT)
- Subaru WRX 2022 (Tomica)
- Porsche Cayman (Matchbox)
- Lexus LC500 (Eracar)
- Lamborghini LP700-4 Liberty Walk V2 (Mini GT)
- Lamborghini Huracan LBWK (Mini GT)
- BMW M4 (Mini GT)
- Audi RS6 (Mini GT)

If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L

The display base is separated into many parts for easy printing and colour swap. The base parts are:

1) Base (BaseV2.STL)
2) Flat Base (FlatBase3.STL & FlatBase3 - No Holes.STL)

Tiny Building parts:

1) Building Walls (Walls.STL, Walls - Plain.STL & Walls - Super Plain.STL)
2) Roof (TinyRoof2.STL)
3) Door (Door2.STL)
4) Table (Table.STL)
5) Shelf (Shelf.STL)

Optional parts for tiny building:
1) Cash Machine (CashMachine.STL)
2) Prop 1 (Prop1.STL)
3) Prop 2 (Prop2.STL)
4) Prop 3 (Prop3.STL)

Station Top parts:
1) Station Top Walls (TopWall.STL, TopWall - Plain.STL & TopWall - Super Plain.STL)
2) Station Ceiling (Plate.STL)
3) Station Top (Top.STL)
4) Penguin Petrol Logo (PenguinPetrolLogo.STL)
5) Clip (Clip.STL)

Optional station top parts:
1) 3mm LED Light fix (LightPatch.STL)

Fuel Pump parts:

1) Petrol Machine Base (PetrolPump3.STL)
2) Fuel Pipe 1 (Pipe.STL)
3) Fuel Pipe 2 (Pipe2.STL)
4) Machine Panel (PumpPanel.STL)
5) Pump Holder (PumpThing3.STL)

Bold parts are Cults exclusive

Print Settings

Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.2 mm

Filament change layer for colours on "FlatBase3.STL" & "FlatBase3 - No Holes.STL":
1) Start (Overall base colour, mine is in black)
2) Layer 9 (Divider colour, mine is in grey)

Filament change layer for colours on "Walls.STL" & "Walls - Plain.STL", tiny building walls:
1) Start (Lowest part, mine is in blue)
2) Layer 16 (Lowest line of the wall, mine is in white)
3) Layer 64 (Middle section of the building, mine is in blue)
4) Layer 180 (Highest line of the wall, mine is in white)
5) Layer 24 (Top part, mine is in blue)

"Penguin Petrol" lettering is painted by hand.

Filament change layer for colours on "Floor.STL", floor for tiny building:
1) Start (Floor gaps colour, mine is in grey)
2) Layer 6 (Tiles colours, mine is in white)

Filament change layer for colours on "TinyRoof2.STL", tiny building roof:
1) Start (Lower line, mine is in blue)
2) Layer 16 (Middle part, mine is in white)

Filament change layer for colours on "TopWalls.STL" & "TopWalls - Plain.STL", station top:
1) Start (Lowest part, mine is in blue)
2) Layer 14 (Middle part of the wall, mine is in white)
3) Layer 89 (Top part, mine is in blue)

"Penguin Petrol" lettering is painted by hand.

Assembly

Check out the new assembly video: https://youtu.be/zPpKTvDxiOc

Flat Base and Base
The car is tied by wires through the hole in the flat base, the second car has a single hole for screwing a screw through it.

Flat base should fit nicely into the base, the tflat base should be glued or tape to the base. As for the alignment of the flat base to the base, see picture below.

Tiny Building
Print the building walls first, the door will fit into the gap but will need some additional tape to hold it there. The large window area has no printed piece, I use a transparent PVC sheet. Floor should fit in nicely, there is a gap for the table to fit in, the shelf will fit in nicely into the back wall.

Prop pieces are optional, I printed mine in white and coloured them by hand. It is meant to make the shelf looks like it is filled with something.

Station Top
Print the walls of the station top first, the plate which work as the ceiling of the petrol station will slide in nicely into the walls. Print the clips to hold the ceiling piece to the walls. Station top will just fit nicely on the walls, the penguin petrol logo will fit nicely into the square hole at the side.

The 2 holes in the ceiling piece is meant for large LED, if you have a smaller LED you can use the "LightPatch" to make the hole smaller.

Fuel Pump
Print the main machine body first, the first dent into the body is meant for the machine panel. The 2 round holes on top is meant for the fuel pipes, print 2 of each pipes to fit into the main body. The 2 lower holes is meant for the fuel gun holder, it will fit in nicely and print 4 of them.

All parts are best to be glued on the machine body but double sided tape works too.

Full Build
With the flat plate on the base, put the completed tiny building in the corner. The fuel pump will fit on to the largest hole on the divider on the flat base. The 2 smaller hole is meant for the square pillars connecting the flat base to the station top.

If you are unsure on how to assemble them, please send me a message or leave a comment.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Facebook: https://www.facebook.com/groups/1115757609295068/