Birds House, No Painting or support needed

NOW THE BIRDS can enjoy living in a house :)))

This model can be printed totally without support.
It goes together very easily (full clear instructions provided).
No need for painting any of the parts (unless you want to of course), you can just choose your favourite colours and print it!
All you need is a bit of glue.

VERY EASY TO CLEAN AFTER USE, simply lift the house from it's base and clean it OR lift the ROOF your choice :)

ENTRANCE HOLE INSERT CHOICES for different bird's species:
• 32 mm (1.25 in) - For Nuhatches & House Sparrows
• 28 mm (1.1 in) - For Great tits & Tree Sparrows
• 25 mm (0.98 in) - For Coal Tits, March Tits & Blue Tits

If you have any questions, please do not hesitate to contact me and I will be more than happy to help you.

Happy printing

Ps: all the STL files are into a zipped files, organised into folders for easy navigate.

Fulv :)

All the parts in the pictures have been printed at 0.2mm layer height using PLA material in various colours.

The TREE BRACKET has been printed with 3DJake ASA Light Blue Filament for strength and durability.

All the other parts have been printed in Polyterra PLA that I have purchased from 3D FilaPrint UK.

I have used CURA 5.1

For faster and easier printing I have already grouped the STL files into folders easy to navigate (see zipped file).

You can print the PDF documents scale 1:1 on an A4 printer to help you with the correct layout of the windows parts. VERY EASY I promise.

The longest part to print is the Roof Main Section (about 11 hours at 30mm/s speed)

If your printer has a build plate no smaller than 190 x 190 x 193 you can print all the parts as they are.
If your build plate is smaller the model can be scaled down 5% to 7%.
The biggest parts are the main section.

If you have any questions on how to print the parts or on how to put it together all you need to do is contact me.