1:24 Scale RC Crawler Stand With & without 608 Bearing

Instead of buying a stand, I decided to make my own. It's really just meant for display to be honest, albeit functional for actually working on the RC car BUT it's 1:24 scale crawler so not like it needs to be on a stand to work on it unlike my 1:10 scale crawler lol

Modeled this for my SCX24 C-10. The top does rotate around but it's literally a peg in a hole and may remodel later on to include a 608 bearing which would be pretty easy to design, just didn't do it for this current version.
UPDATE: MADE A VERSION THAT INCORPORATES A 608 BEARING THAT PRESS FITS IN, ROD IS NOW SOLID IN BASE

Made some honeycomb cutouts to cut down on material need and lets be honest, honeycomb just looks cool. The top can be printed without supports as it expands from the main pole on an angle to the base of the top of the stand. Use supports if you want but didn't need them with my Ender 3 S1 Pro.

Have fun printing!

Printer Used: Ender 3 S1 Pro

Base Size:

X - 100 MM
Y - 125 MM
Z - 30.36 MM

Top Size:

X - 60 MM
Y - 57 MM
Z - 75.6 MM

Cura settings:

Resolution: 0.2 MM
Print Temp: 210
Bed Temp: 60
Print Speed: 60 MM/S
Wall Speed: 40 MM/S
Build Plate Adhesion: Brim
Top/Bottom Layers: 4
Wall Line Count: 3
Infill: 25%
Infill Patter: Cubic
Retraction Distance: 0.8 MM
Retraction Speed: 45 MM/S
Supports: Not Needed

Filament Used: PolyMaker - PolyLite PLA Pro - Green