STEAMPUNK BOILER - MONEY BANK

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. THIS FILE IS FOR PERSONNAL USE ONLY. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

2023 is fast approaching and one of the best ways to start the year is by saving a little to spoil yourself eventually! :p

So here's a nice steampunk bank, with a funnel on top to quickly drop your change in it.

Super easy to print:

-Multiparts, so less risk for a fail and no need for paint.
-All parts are 100% support free. One part is pre-supported. No need to add supports in the slicer.
-All parts are already placed in the right orientation
-Color coded names to help you grouping the parts
-Two parts have a color change while printing. It is not necessary to do it, but if you wanna do it, the colors are indicated in the name of the files. So when you have a file with multiple colors in the file name, it is to guide you with the color changes.

Included instruction (PDF) with exploded views and step-by-step instructions.

PUT AT LEAST 3 WALLS. With a 15% infill and 3 walls (i prefer 4) you will have strong parts, especially where you have screws.

HARDWARE. You will need the following hardware:
-14x M3x10mm screws.
Imperial equivalent can work too (6-32).
Holes are self-threading, so any screws with a diameter near 3mm will work fine.

If you have any questions, just send me a message. I will try to help you as much as i can.

Have fun! And don't forget to save some pennies over the year!!