BOTTLE - SOAP DISPENSER - Variety

How can we use plastic to reduce the plastic usage? In this bottle you can fill shampoo, soap, cleaning products, water or many other liquids, so that you use it as many times as you can, buying only the refil later.

You will download in 3 different shapes, that were not really inspired on anything, except the heart shaped one. Although they are quite complex, no one needs support. But I must confess that due to the complexity, they easily work with Resin Printers, but I am not sure if FDM printers could handle them.

There is a thread on the top, where you can fit a soap dispenser pump or a spray from many different brands found on a regular supermarket. Even some caps from other bottles are fitting here. I guess there are dozens of products with this size in the supermarkets. In one of the pictures I used a pump from a "Palmolive SoftSoap" that I can find in almost any supermarket in Europe, US and Brazil. Probably other countries too, although I can't comfirm by myself. Due to the thread size, you can use a variety of different sprays as well.

In case you want a simple cap, there's one included for printing it too.

As I mentioned before, I printed only with a Resin Printer and it was super super easy, because there's no need of support. Only use your standard settings and it works, although your printer must be well calibrated and clean.

With FDM I didn't try it yet, although I have these models for over an year and also over 20 printings of each one. But I guess you need around 103-105% of filling material for being sure that it will not leak and as slow as possible!!! Raft is recommended always to keep in position!