Jujutsu Kaisen Prism Realm

My version of the Prism Realm from the manga Jujutsu Kaisen.

All credit to the original artists.

File contains two versions:
1 - Full Cube with blank eyes (not test printed)
2 - Separate sides for either blank eye or resin moulded eyes.

For the separate version you will require:
1 of each face 1 through 6.

1 x Eye blank
14 x eye 2345
6 x eye 6

To make the resin moulded eyes you need to make silicon mould of the blanks then add the following:

1 x eye 1 front
14 x eye 2345 (use front or side depending on where you want it looking, SIDE is reverable for left or right
6 x eye 6 (use front or side depending on where you want it looking, SIDE is reverable for left or right

For the iris I recommend undercoating it dark then adding detail over several layersd before a wash of appropriate colour

I take no responibility for any souls trapped or curses brought onto the owner

test Printed on Elegoo Satrurn 2 using Siraya tech fask abs smoke black.

each face can be printed flat on build plate or angled (15degree) depending on preference. obniuosly angled will reqyure supports.

each of the pieces can either be printer flat on build plate or angled with supports.

I take no responibility for any souls trapped or curses brought onto the owner