Skip to content

Dummy Firearm Ammunition, Various

πŸ”« 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 886 views
  • 1 like
  • 43 downloads
License
3D design format
Folder details Close
  • ed6d9e.22LR.stl
  • cc7a0f.357_Magnum.stl
  • 589af5.380ACP.stl
  • 5668a6.38_special.stl
  • 4f1c92.40_SW.stl
  • ac562d.45ACP.stl
  • 0e8e0f.45_Colt.stl
  • 94220e.45_Colt.stl
  • 25a825.50_BMG.stl
  • 5.56x45mm_.223_Remington.stl
  • 7.62x39mm.stl
  • 7.62x51mm_.308_Winchester.stl
  • 7.62x54R.stl
  • 9x19mm.stl

Learn more about the formats
Publication date 2023-01-03 at 16:57
?
Published to Thingiverse on: 2018-07-17 at 01:45
Design number 991486
fishinabarrel

fishinabarrel

3D printer file info

3D model description

These are various firearm cartridges designed to spec. I got the dimensional specs from Wikipedia pages and reloading manuals. The ones I've tested have been accurate enough to chamber, though they all fit very tightly.

Naturally, the extractor rim doesn't fair well when printed in PLA. It fails 100% of the time due to the tight chambering. If you slightly scale the model in the XY directions (1-3%), you could probably get them to fit loosely enough to keep the rims intact.

I left a primer pocket in each cartridge so you can fill it with soft material if you want to use these as snap caps. I would not recommend fitting an actual primer. ;-)

There is one significant concession to printability: none of the cases are chamfered at the bottom (head). That makes them a little tricky to feed in some guns, and makes the rims look slightly thicker than the real deal.

The spitzer-point bullets are modeled with R10 tangent ogives and a meplat diameter of around 1.5mm. Round-nose bullets, I just eye-balled the nose.

I've got parametric models for most common case/bullet styles at this point, so if there's a cartridge you want, drop me a message. I'll probably be adding more as I get bored.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.