mini air compressor

A small air compressor/ pump that can be made to run off of usb. it makes about 1.25psi on usb and may make more at higher voltages or with a larger motor. the motor options are a 380 or 450 motor. the first version is all plastic on metal running parts but seams to hold up decently , time will tell how well tho .

I have a few plan in mind for this as well as having them as a good backup for my aquariums and other systems requiring air pumps .

this pump moves more air than a standard small aquarium air pump , and should be suited for air assist on an engraver , or maybe as a remote cooling system .

materials:
all printed parts ( a few head options available)
6mm dia stainless straw, ( acquired from dollar store or wherever .)
8pc m3 x 6 cap screws
4pc m3 x 20 cap screws
2pc m4x4 screws
1pc m4x20 cap screw for wrist pin
5pc m4 hardware for flywheel
2pc m8 setscrews for counterweight.

cut the straw with one piece 73mm long , for the crank shaft
and 24mm for the connecting rod shaft.

gaskets can be printed, or cut on a laser engraver/cutter, reed valve needs to be flexible, the rest can be paper. the cut size for the engraver are 40mm square after cropping.

the cylinder requires fitting to the piston , more or less the print lines need to be sanded out .

depending on your printer you may need to clear the bushings with a 6mm drill .

I plan to updated the drawings for bearings throughout that update will be up shortly but it works pretty good in the current sate .

youtube assembly video: https://youtu.be/K4xYlPjOcug

-