Skip to content

FDL3 - HPA

HPA_FDL_v73.png FDL3 - HPA
HPA_FDL_v73.stl FDL3 - HPA
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 864 views
  • 16 downloads
License
3D design format
Folder details Close
  • HPA_FDL_STL.zip
    • 8mm Clip.stl
    • Barrel Left.stl
    • Barrel Padding.stl
    • Barrel Right.stl
    • Barrel.stl
    • Battery Cover.stl
    • Bottle Stock Main Body.stl
    • Bow Inlay.stl
    • Bow Main.stl
    • Butt Plate.stl
    • Cheek Rest.stl
    • Electronics Cover New v2 Switch.stl
    • Electronics Cover Phat.stl
    • Electronics Cover.stl
    • ESC Holder.stl
    • Front Grip.stl
    • Garnish Left.stl
    • Garnish Right.stl
    • Grip Frame.stl
    • Grip Guard.stl
    • HK_slim_v4.stl
    • Left Cover.stl
    • Left Scale.stl
    • Lower Cowl.stl
    • Lower Pusher Bracket.stl
    • Mag Release Body.stl
    • Mag Release Latch.stl
    • Mag Release Lever.stl
    • Mag Release Linkage.stl
    • Mag Release.stl
    • Mag Switch.stl
    • Mag Well Receiver - Short.stl
    • Motor Plate Left - Short.stl
    • Motor Plate Right - Short.stl
    • Motor Shroud.stl
    • Regulator Lower Support.stl
    • Right Cover.stl
    • Right Scale.stl
    • Sensor Cover.stl
    • Stock Attachment Point.stl
    • Supercore Upgrade Spring Seat.stl
    • Top Rail Front.stl
    • Top Rail Rear.stl
    • Trigger.stl
    • Upper Cowl.stl
    • Wire Channel.stl
  • HPA_FDL_Step.zip
    • HPA FDL v72.step
  • HPA_FDL_v73.stl

Learn more about the formats
Publication date 2023-01-08 at 08:36
?
Published to Thingiverse on: 2021-01-11 at 11:43
Design number 999220
airzone

airzone

3D printer file info

3D model description

This is the HPA FDL3 remix called WTFDL-3

Please note this is an advanced build. You will need to have experience in HPA and ideally familiarity with the FDL3 build process.

Please find some technical details here: https://www.reddit.com/r/HPAnerf/comments/ivu1gd/details_on_hpa_fdl3_software_controls/

You will need the same M3 x 43mm bolts to hold the front of the blaster together. Also, you will need a selection of M4 nuts and bolts where nuts are installed, and #6 self tapping screws for the rest of the blaster - in largely the same lengths as the OG FDL3.

Regulator is a Polarstar MR. Regulator fits in the OG battery area, and the battery now fits up the top-front cowling.

Step files are included just in case you don't want a MCU / Narfduino controlled blaster, or wanna adapt it to a different reg and/or solenoid.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.