Pokémon Coaster Electric type

This is a coaster designed with the Pokémon types as symbols imbedded in the coaster.

This is a "2" parted design.
One with the base color and the other part as the inlay.
This design had a 0.1mm tolerance so it is press fit in the coaster. No glue needed. (It maybe needs a little love tap with a hammer)
If the coaster inlay does not fit u can change the "horizontal expansion" setting to give it the tolerance u need.
The inlay part has a small chamfer at the bottom so it can fit more easily. So watch out if u have problems with Elephant foot prints.
This is still a work in progress design as I am still designing all the types.
U can find the types that I already made on my page.

The coaster has a diameter of 9cm and a thickness of 5mm

If u are interested in the coaster but there is something u want to change. For example the sizes of the coaster diameter but still want the symbol to stay the same size or anything else.
Just message me and I'll see what I can do!

This coaster Pokémon type is "Electric"

https://youtu.be/Z7JFXtGGOpM

I used an infill of 20% on both parts.
And when needed u can change the horizontal expansion to fit the inlay.
The inlay part has a small chamfer at the bottom so it can fit more easily. So watch out if u have problems with Elephant foot prints.