Dead of Winter Crossroads full insert, accessories and playerboard EN / ENG

This is my full insert and playerboard design for Dead of Winter Crossroads boardgame available in French and English.

My design come with everything you need to set up quickly and play with a lot of confort. Every trays or holders have an icon or text at the bottom to identify clearly which came inside. Moreover, the vertical storage is allow.

You have everything to have a good organised play table:

• a card box with descriptions on the side (FR / ENG) and storage for first player tokens and circular tokens at the rear.

• a lot of trays for cards, discards and tokens to keep a clear boardgame during your game (FR / ENG)

• a tokens and dice holder to keep everything at hand easily. The dice holder can be separate from the tokens holder.

• localisations tray for cards stack and sound tokens.

• boxes for survivors (female and male separatly) and zombies for quick set up and easily find your new teamate.

• a playerboard to keep everything clear and in place: leader on the left with his inventory, team in the middle with their inventory under (you can have several cards on top of each other, slightly offset), secret objective on the right with a hole to hold the knife token. You can also put the wounds and frostbite in the space of the character description.

Everything can be stored in the game box.

For storage in the box, please refer to the images which show the layer by layer arrangement. For playerboards, see also pictures for a successfull storage.

There are still some empty slots (card cover 1 & 2) in which you can place elements or 3d prints.

For the complete set up you will need to print all the attached files once (also refer ENG / FR) and some in multiple copies:

• 5x playerboard

• 6x locations

Sometimes, you need to print trays with a little support because they have an extra thickness on the bottom to facilitate their storage. Some parts of the playerboard need a small support too to allow the player's cardboard to be placed under.

the dice holder is held in the token holder by a slight overhang in the design. You have to press horizontally to insert it and pull horizontally to remove it.

I printed the glass of the playerboard with 95% filled clear filament to ensure transparency. But you can print with an opaque filament too.

Note that my designs are not compatible with sleeves cards!

Resolution : 200

Infill : 15% (grid) / 95% for glass playerboard

Support : Yes (just a little and for a few files only)

Material : PLA

Color : Grey, Black and Cunning clear