Predator Shoulder Cannon plasma Two Size File STL – OBJ for 3D Printing

follow me
FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks

ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/

TWITTER: https://twitter.com/Cody3D
ARTSTATION: https://www.artstation.com/cody3d/store
YOUTUBE: https://www.youtube.com/channel/UCegptSyuzQWuU1Fow04_MKw?view_as=subscriber

Predator Shoulder Cannon plasma Two Size File STL – OBJ for 3D Printing Model Printing Miniature Assembly File for 3D Printing FDM-FFF DLP-SLA-SLS

Predator Shoulder Cannon plasma Two Size, File STL – OBJ for 3D Printing Model Miniature Assembly File for 3D Printing FDM-FFF DLP-SLA-SLS

Assembly Figure
more than 200 hours of modeling
two versions
however, the dimensions can be changed with each slicer

For FDM-FFF printers the cannon is 32 cm long, bands can be adapted in the lower part, to be able to place it on the shoulder.
As seen in the photos, all parts of the cannon are movable,
the screws can be stamped, but I recommend using 4 mm thick steel screws

in total Predator Shoulder Cannon is composed of 2,8 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions FDM-FFF W 10 Cm D 32 Cm H 25 Cm
W 4 inch D 12 inch H 10 inch

dimensions DLP-SLA-SLS W 6,6 Cm D 20 Cm H 15 Cm
W 2,5 inch D 8 inch H 6 inch

all files are already in place for optimal printing

Predator Shoulder Cannon3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
Each file has been checked and repaired with Netfabb
The parts of the model are already positioned for 3D printing
Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...
All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

The Shoulder Cannon, also known as the Plasmacaster, is featured in every Predator movie. Each of them has a slightly different design but the principal is still the same.  The shoulder cannon is the Predator’s signature weapon and is the one everybody remembers after watching the film. It’s also the most powerful weapon at the Predator’s disposal. Essentially, what it is, is a gun mounted on the Predator’s left shoulder.
At the Predator’s will, it fires powerful blue balls of plasma at a target. It’s also extremely accurate because of features on the Predator’s mask. Firstly, the shoulder cannon is connected to the Predator’s vision mode. When an object is in motion, a red triangle focuses in on the target in its vision which is responsible for the great accuracy of the weapon. Secondly, there’s a targeting laser which is beamed from the Predator’s mask onto the target.

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt

Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of
the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:

Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:

Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Grid
Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.
Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation
of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this
page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.
Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing
on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence