Arnold Action figure

This is an 1/10 action figure scale.
Arnold War movies action figure.
Arnold figure, inspired on Dutch(predator) and John Matrix(Commando) articulate figure

Based on predators neca figures, but with more articulation.

This figure is a action figure kit, feel free to make any kind of changes you want.

Tools you will needed in this project.
• sandpaper
• super glue
• art knife
• thin wire

Depends the scale of the figure, you can join the joints with a thin wire(original size), if are in 1/10 scale, but if you wanna make bigger, in some 1/6 scale, you can use toothpicks.

This figure needs that joins and peg peaces an infill more than 80% if you make in PLA.

The figure will receive updates and new accessories over the months.

This figure are printed in PLA, but you can print in ABS too.

If you only like the head, you can buy it separately through this link.
https://cults3d.com/en/3d-model/game/arnold-schwarzenegger-head

All these heads are compatible with this body
https://cults3d.com/en/design-collections/TomActionFigures/heads

For a better result, it is important to print the parts of the joints in colors close to the color of the figure. If you have PLA and/or ABS in only one color, you can paint each piece separately with acrylic paint, and after drying, apply a light layer of acrylic varnish and/or super glue spray.

Filament: PLA
Need Supports: Some peaces YES

Very easy to print, even novices can print.
Printed in Ender 3 pro
Bed temperature = 60 degrees
Print quality = 0.12mm/ but you can print in small mm too.