3D model description
Hot Air Balloon (Lamp) BUNDLE (STANDARD size)
(This model is also available in MINI size)
It includes the START UP MODEL (with Segments OPT 1) AND all the others ADD ON Options 2 & 3
NOTE: The Commercial license for this product is available on request for selected customers please contact me for more information on: fulv@me.com
thanks :)
I love Hot Air Balloons, I love how colorful they can be and how they can make you dream of flying around the World in 80 days :)
This is a fantastic model that can also be used as a Lamp.
The details of the light bulb I have used are in the pdf documents provided.
This is where you can really go crazy with all the colors that make you happy :)
In all the versions you can print the balloon segments parts in VASE mode (Pdf document provided with all the details).
As always, all the parts are printable without any support material and no need for painting.
Full assembly instructions included.
All you need is a bit of glue.
I have used NANO GLOOP for PLA and it worked beautifully well with no mess or fingers glued together.
If you click on this link below and use the code ''FULV'' you will automatedly get a 10% discount on your order.
I would recommend purchasing a couple of the NANO bottles which will be plenty for this model.
https://www.3dgloop.com/?partner=FULV
It prints and goes together very easily.
Model size fully assembled:
Diameter 203mm (8in) x 406mm (16in)
If you have any questions, please do not hesitate to contact me and I will be more than happy to help you.
Fulv :)
fulv@me.com
FOR THE LIGHTING:
The model has been designed to incorporate a USB small light bulb like Toolmoon with a vertical connection.
But any small lights will work very well.
The MALE SCREW BASE part is available in 3 versions, choose the one you need for the light you are planning of using:
MALE SCREW BASE for ToolMoon Light Bulb
MALE SCRE BASE 27mm HOLE
MALE SCREW BASE 30mm HOLE
The wires can be directed out of the model via the cut out at the back of the Cloud Base.
3D printing settings
All the parts in the pictures have been printed at 0.2mm layer height.
Except for the Cloud base where I have used adaptive layers in Prusa Slicer.
All the Balloon Segments have been printed in VASE mode. Details instruction PDF document included in the zipped file.
Filament of choice:
Polyterra PLA
PolyLite PETG Transparent (for the transparent parts). You can use any transparent or translucent PLA too).
Pdf documents with the list of colours used provided in the zipped file.
Slicer:
CURA
Prusa Slicer
You can print the PDF document scale 1:1 on an A4 printer to help you with everything, VERY EASY I promise.
The longest print is the Cloud Base if printed with adaptive layers, about 9 hours at 30mm/s speed). If The same part is printed with 0.2mm layer height it will take less time.
All the other parts take much less time.
If your printer has a build plate no smaller than 200mm x 200mm x 189mm you can print all the parts as they are.
If your build plate is smaller the model can be scaled down 5% to 7%.
IMPORTANT: if you do that the color changing parts layers heights will be effected and you will need to double check the correct layers when changing the colors in your slicer).