Soap Dispenser - 8 Styles, Universal for Soap, Lotion etc.

Universal Soap Dispenser Bottles, 8 Designs

We recently had to replace some of our soap dispensers (they tend to corrode after a few years of use and the pumps get stuck). Rather than buying new dispenser sets we decided to just buy a set of cheap (at approx. USD 5/piece) stainless steel replacement pumps and design our own dispenser bottles.

So here a set of 8 different soap (or any other liquid) dispenser bottles (for your bathroom, toilet, kitchen...). They all come with a standard 28 mm thread, so most commercial pumps should fit (caveat, the 28 mm threads used in most liquid soap bottles and pumps are not the same as the ones used on your favorite soft drink bottles - I guess this is to prevent accidental mix-up).

You can either use some cheap commercial soap pumps (recommended):
- We use these stainless steel soap dispenser pump heads (available in polished metal and black).
At less than USD 5/piece they are cheap, look good and work really well.

However, you can also use the simple plastic pumps that likely come attached to the liquid soap bottles when you buy them. They usually have the same 28 mm thread, so should easily fit. Not as stylish but they are essentially free and just as functional.

Comes in 8 different styles:
- Cubic design roughly 70 mm with text
- Same but slightly rounded
- Elegant tall round (55 mm) bottle with text
- Same with helix pattern
- Spherical (approx. 80 mm tall)
- Round, short with 75 mm diameter with text
- Conical, 70 mm diameter
- Simple square design (60 mm) with text

I have also included a 28 mm screw cap.

FILAMENT
- I print them either in plain warm white filament, transparent or in my favorite filament for pretty much everything, namely this incredibly easy to print Carbon Fiber PLA , which adds that little extra strength and gives this beautiful soft touch and semi-gloss shine,
- and/or in Silk Silver, Bronze, or Copper - very stylish, particularly with the black pump heads.

PRINTING
Printing is super easy. All bottles are designed so you won't need any supports. So no supports or build plate adhesion needed (other than what you always use). I print mine at 0.25 mm resolution, 3 walls and with 20% infill.

I really hope you like the design and find it useful. If you feel like tipping (thanks in advance), rather than clicking the "Tip Designer" button, PLEASE donate to UKRAINE (or any other people in need). There is a cold winter ahead and these people will need any help they can get (a lot more than I do)! THANKS!!

HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!

Enjoy and happy printing!

-