Universal Front and Rear Air Rifle Pistol GoPro Tripod Adjustable Folding Shooting Rest, Sighting zeroing and maintenance Stand BSA R10 R12 CLX Pro SLX FX EdGun, Daystate, Wolf, Walther RM8 Weihrauch HW Reximex AGT Uragan Crosman 2240 2250XL Gamo Phox

Front and Rear Air Rifle Pistol GoPro Tripod Adjustable Folding Shooting Rest Sighting zeroing and maintenance Stand

This is the full FRONT and REAR kit. I have have the front available on its own and the rear on its own. See my uploads. They are modular and all parts are interchangeable front to rear.

With a choice of flexible rifle rests and mounts front and rear so your pride and joy doesn't get damaged.

Update - I have added a female picatinny mount, designed to printed in TPU like the other mounts and can be used with or without an M5 or M6 x 30mm nut and bolt.

I have a few shooting rests and tripods but was never comfortable with any of them so I designed my own modular system that could also support a GoPro or action cam. It needed to be very strong, light and need no additional hardware.

I have tested these tripod on the range and in the field in some horrendous weather. Don't forget to check out my other air rifle accessories including a rotating pellet tin. https://cults3d.com/:1306292

The support rests are printed in TPU and are held in place by friction and are easy to remove. The locknuts also keep you shooting height exactly where you want them. See images.

Front Minimum shooting rest height 170mm (6.69 inches)
Front Maximum shooting rest height 252mm (9.92 inches)
Front Weighs just 197 Grams (6.94oz)

Printed in PETG (ABS will work well too) and TPU or other flexible filament for the mounts.

If printed using the following advice your tripod will be serious competition for any metal mounts and will last just as long with the added bonus you can print any parts again if you manage to damage anything.

I have all the different flexible supports and GoPro mount. The rifle mounts will suit PCP bottles, barrel rest and foregrip rest and the rear rests should accommodate most rear stocks and butts. The mounts also have a hole big enough to seat a sling swivel (minus loop).

Knowing how to use custom infill and the mesh blocker in Cura will help https://youtu.be/su_m5zV9rvA but is not essential.

You will only need to use supports for the Centre Boss (Cura from baseplate not everywhere).

Fully clean all threads after printing and use a tiny amount of silicon spray if you have any.

Don't forget to checkout my PelletMag Pellet Storage solution and other airgunner accessories.

Knowing how to use custom infill and the mesh blocker in Cura will help https://youtu.be/su_m5zV9rvA but is not essential.

Printed with PETG (ABS will work too) and TPU

0.4 Nozzle
0.2 Layer Height
Tripod Centre Boss PETG X2 30 - 40% Infill (100% on threads and mounting points)
Tripod Centre Threads tall and short PETG 30 - 40% Infill
Tripod Legs Front X3 PETG 30 - 40% (100% around the bolt hole)
Tripod Legs Rear X3 PETG 30 - 40% (100% around the bolt hole)
Tripod Bolts/Screws X6 PETG 100% Infill (print slowly)
Tripod Locknut X4 PETG, 100 Infill
Tripod Bolt Spanner 100% Infill
Print V Cup, Cup and GoPro mounts are printed in TPU 30 - 40% Infill
Rear Clamp and Cups printed in TPU 30 -40% Infill
Thread end cap X2 printed in TPU 30 - 40% infill

These files are provided for PERSONAL USE ONLY. I do NOT Allow the sharing or redistribute these files or any derivatives / remixes, or to use them for commercial purposes, including selling the printed models.

0.4 Nozzle
0.2 Layer Height
Tripod Centre Boss PETG X2 30 - 40% Infill (100% on threads and mounting points)
Tripod Centre Threads tall and short PETG 30 - 40% Infill
Tripod Legs Front X3 PETG 30 - 40% (100% around the bolt hole)
Tripod Legs Rear X3 PETG 30 - 40% (100% around the bolt hole)
Tripod Bolts/Screws X6 PETG 100% Infill (print slowly)
Tripod Locknut X4 PETG, 100 Infill
Tripod Bolt Spanner 100% Infill
Print V Cup, Cup and GoPro mounts are printed in TPU 30 - 40% Infill
Rear Clamp and Cups printed in TPU 30 -40% Infill
Thread end cap X2 printed in TPU 30 - 40% infill