Free Energy V2.0 Levitation Spin & Axial Alternator

https://www.youtube.com/watch?v=X5Y4lS6k7ww

In English:

The set is a Spin Motor with a Reed that detects the passage of the magnet to activate a coil to which we have added on its axis 4 axial alternators of 6 coils with 3 phases and 5 groups of magnets arranged in blocks of 32 magnets in eight double blocks at two heights, in total 160 magnets.

The electronics consists of 26 diodes, a 10 Ohm resistor and capacitors plus a Super capacitor.

The magnet belt pushes the assembly up and forces it to be in the center thanks to a toroid magnet, the central aluminum shaft is supported with a needle on an Allen screw, the weight of the assembly is about 1/2 Kilogram, but the magnet belt manages to reduce the weight to a few grams.

The coils are 0.2 mm.

The assembly can run for about +10 hours free of external energy, only necessary for starting.

We are still working on it, hope you like it.

En Español

The set is a Spin Motor a Reed which detects the passage of the magnet to enable a coil to which we added 4 axial alternators shaft 3 phase and 6 coils, 5 groups of magnets arranged in blocks of eight magnets 32 double blocks on two levels, totaling 160 magnets.

The electronics consists of 26 diodes, a resistance of 10 ohms, 2 capacitors & 1 Super capacitor.

The belt magnets pushes the set up and forces him to be at the center thanks to a toroid magnet, the core of aluminum supports with a needle in Allen screw, the overall weight is approximately 1/2 kilogram, but the belt gets magnets to reduce weight a few grams.

The coils are 0.2 mm.

The set can operate for approximately +10 hours free of external power, only needed for starting.

We continue working on it, I hope you like it.

It's Spanish

The assembly is as shown in the images and videos.

En Español

The assembly is as shown in pictures and videos