Universal Happy Poo Bag Holder

Please use version 5 located here:

(https://cults3d.com/en/3d-model/home/universal-happy-dog-poo-bag-valet-ver-5-0)

Information purposes only:
This is an update and rework of my Happy Poo Bag holder (3D design Happy poo bag clip for flat leash ver 2.1 | Tinkercad).

Nothing is more inconvenient than holding a poo bag and walking the dog. Especially if you walk two dogs or your dog does multiple jobs in one walk.

This model will work on a flat leash of most standard widths and on the typical round or rope style leash. Also beefed up the side holders and added round ends to avoid possible snapping and catching on clothing. Added slots for zip ties on round leash.

If used on a flat style leash you print two clips and glue on to the back side of the bag holder with the open slots facing out. Then slip the leash into the slots, being sure to face the hooks up towards the leash handle (see arrow on flip side of holder).

If used on a round or rope style leash do not print the clips, but instead use zip ties to lash the holder to the rope, being sure have it face up as the arrow indicated on one side of holder.

Note #1: You can glue the flat leash clips and still use the round rope with the zip ties.

Note #2: I suggest you couple my Happy Face Poo Bag Holder with my remixed version
(https://www.tinkercad.com/things/ceMTHnkI3W9-dog-poo-bag-holder-modified) of Dog Poop Bag Holder by teamxeri - Thingiverse and you have a complete system.

printed using Sovol SV-06 and Cura slicer