*Magnetic Grips for Quest 2 *

*Hi everyone! *

First of all I'd like to thank joaoluisbrito for creating such a intricate and functional stock. I'm a fan of the VRGM stock and love how it feels in the hands however, I've noticed a lack of Quest 2 compatibility.

So, after a few weeks of trial and error, I've finally decided to upload these here.

These magnetic grips are designed to be used with the 2 x 20 by 3 mm magnets, as I've not had luck with the 4 x 10mm magnets.

There's a cut out for wrist/knuckle straps on each controller as well. Not only do these help with holding the controllers, these also act as a safe guard for the controllers as they prevent the printed grips from slipping away. Just so you're aware - the opening is around 22mm wide, so double check if your straps will fit.

Another feature is that these have triangular raisers - these prevent the grips from rotating which causes the magnets to separate. I've read this in a few comments and had the magnets separate for me as well - causing the stock to fall.

I hope you enjoy printing and using these! I've tried to make them as easy to print (the versions before weren't so successful!)

#####As this is my first file on thingiverse, let me know if there's any feedback!

#####If you have questions, leave these in the comments below. Cheers!

If you enjoyed using this grip and would like to support me, buy me a coffee! Any tips are appreciated!

-