LmaPs

LmaPs

Light mount on pepper spray (animal defense spray) For flashlights with a body diameter of 25mm.

The LmaPs is a supplementary product for the Hoernecke TW1000 Super Gigant Pepper series pepper spray. It is a mounting, for attaching commercially available flashlights directly to the pepper spray.Through this you bring the light factor into play.

The tactical benefit is shown by better visibility of potential attackers, for better assessment of the situation and also as a direct deterrent by the light itself.

Areas of application can be found in the domestic sector, as well as in the government sector or private security services.

For commercial or government use, send me a message via cults3d.com.

There is a short video about it on Youtube.

https://youtu.be/E5Ild7nBlSI

Additionally required:

5x cylinder head screws M4x10mm

1x Cylinder head screw M4x40mm (no continuous thread)

2x cylinder head screws M4x50mm

7x hex nuts M4 Here you can also take stop nuts, this saves the Loctite(threadlocking paint)

and of course an animal repellent spray from the company Hoernecke, from the Super Gigant Pepper series.

The printing takes about 6h with a 0.4mm nozzle and consumes about 50g at 30% filling and 2.4mm wall thickness

Just drag and drop all the STL files into your slicer.Check that the retaining clip is on its back and print with your desired settings.

The building instructions describe the way to the assembled LmaPs

0.4mm nozzle, 0.2mm layer height, 3-5 perimeter and 30% filling.

Material: PETG