XP Deus I & II Organizer / Charging Cradle

Keep your XP Deus I or II safe and organized while charging between hunts!

My wife got tired of my XP Deus gear (usually dirty) laying on the floor around random electrical outlets while it charged. So I designed this XP Deus Accessory Organizer & Charging Cradle to keep the coil, controller, headphones and MI6 pinpointer organized, charged up and ready to go. My wife is happy and I have to say I like having a specific place to keep it all.

There are a few versions to choose from (All versions work with both the Deus I and Deus II):
Version A's print the pinpointer holder and coil hanger as one piece. (Recommended if printing in PETG or stronger and have no issues with overhangs.)
- A1 is specifically for the 5"x9" HF Coil.
- A2 works with all other coils.
- Version A requires (1) M3x16 (or longer) bolt and (1) M3 nut to mount the Headphone Arm.

Version B's print the pinpointer holder and coil hangar as separate pieces. (Recommended if printing in PLA or have trouble with overhangs.
- B1 is specifically for the 5"x9" HF Coil.
- B2 works with all other coils.
- Version B requires (1) M3x16 (or longer) bolt. (2) M3x10 or (2) M3x20 bolts and (3) M3 nuts.

Pinpointer holder works with other pinpointers - tested with Garrett AT, Nokta Pointer, and Nokta PulseDive. (PulseDive is a little top heavy, but it fits.)

Version A is best printed in PETG or stronger. Version B is fine printed in PLA+ or stronger. If you struggle with overhangs, print version B. The total width of the organizer is 160mm.