PS5 Video Game Trophy Holder

Designed to display your most prized and favorite game in unique style, this PS5 game holder fits standard and steel cases. It can also be used to house your game case that is currently being played in the system for easy retrieval and swap. Designed in 3 pieces for ease of color selection for printing without the need for a multi-colored printer. Simply slide the side panels onto the base, drop the center section onto the base, then snap the side panels into the center section. Then get back to gaming!

Nozzle size: 0.4mm
Layer Height: 0.28mm or .020mm (smaller is ok to)
Top layer Count: 4
Bottom Layer Count: 3
First Layer Height: 0.30 (for a good squish for adhesion)
Seam Position: Back (orient parts facing the front of the printer)
Wall Count: 3 minimum so that no infill pattern shows through the skin.
Supports: yes, build plate only
Infill Density: 15% infill.
Build plate adhesion: If you have excellent adhesion on your printer, then no brim or rafts are needed. If you have trouble with adhesion then it is recommended to use a brim.
Specific settings for Base part: use 4 walls and 25% infill so that the center post is strong.
Temps/Speeds: Use filament recommended temps and speeds.

Lastly, as with all of my designs, it is recommended that your printer has gone through an e-step and flow calibration for optimal print success, fitment and quality.