Isengard Middle Earth Lord Of The Rings SBG Heroes point tracker Dashboard Console

ENG Description / ESP Description

If you play Lord of the Rings SBG and command the troops of Isengard, you'll love this.

This console is designed as a fundamental help in your games since you visually track all the points of your heroes.

This console has magnetized hero boxes, so when printing it on your 3D printer, you must pause the print at the appropriate time to insert the 6x3mm cylindrical magnets. Be very careful with the magnets, respect their polarity so that the hero blocks fit together and are attracted to the squares.

At the top of the console, you have an Uruk scimitar where the initials of the most important values of your hero are exposed.

This scimitar has two compartments inside to insert 2 6x3mm cylindrical magnets.

The scimitar serves as a 6" ruler to measure the basic movement of Uruk troops as well as the effect of some abilities. The end of the scimitar has a 1" measurement that serves as a zone of control meter for your models.

An stl file of the hero block without text is also provided, so you can add the text you want with your 3D software.

The original Warcry box was printed on a prusa MK3s 3D printer.

It does not need supports.

Printed on Prusa mk3s

........

If you play Lord of the Rings SBG and command the troops of Isengard, you're going to love this.

This console is designed as an essential aid in your games as you visually keep track of all your heroes' points.

This console has magnetized hero boxes so when printing it on your 3D printer, you must pause printing at the appropriate time to insert the 6x3mm cylindrical magnets. Be very careful with the magnets, respect their polarity so that the hero blocks fit and are attracted by the boxes.

At the top of the console, you have an Uruk scimitar where the acronyms of your hero's most important values are displayed.

This scimitar has in its interior two compartments to insert 2 cylindrical magnets of 6x3mm.

The scimitar serves as a 6" ruler to measure the basic movement of Uruks troops as well as the effect of some skills. The end of the scimitar has a 1" measurement that serves as a control zone meter for your miniatures.

A stl file of the hero block without text is also provided, so you can add with your 3D software any text you want.

The original Warcry box , was printed on a prusa MK3s 3D printer.

No brackets needed.

Printed on Prusa mk3s

Heroes Blocks 0.20

Console 0.30

Cimitar 0.30