Skip to content

Switch Knob Part 2 of 2 for Floor Lamp - Inner Shaft

Switch_Knob_Part_2_of_2_for_Floor_Lamp_-_Inner_Shaft.jpg Switch Knob Part 2 of 2 for Floor Lamp - Inner Shaft
Switch_Knob_Part_2_of_2_for_Floor_Lamp_-_Inner_Shaft.STL Switch Knob Part 2 of 2 for Floor Lamp - Inner Shaft
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 300 views
License
3D design format
Folder details Close
  • Switch_Knob_Part_2_of_2_for_Floor_Lamp_-_Inner_Shaft.STL

Learn more about the formats
3D model size X 9.02 Γ— Y 9.02 Γ— Z 20.4 mm
Publication date 2023-01-29 at 20:25
?
Published to Thingiverse on: 2011-09-30 at 14:59
Design number 1036174
3DGuru

3DGuru

3D printer file info

3D model description

This design is for a floor lamp that has a switch on the floor lamp's shaft. Some floor lamp mechanical switches can break due to a thin flange on their inner shaft that can break over time (this thin flange is held on the inside of the lamp switch's retaining nut). This flange is what keeps the lamp's on/off switch attached to the lamp. Switch Knob Part 2 of 2 for Floor Lamp replaces the part that has a broken flange. Use this part with "Switch Knob Part 1 of 2" for Floor Lamp - this part is also available on Thingiverse. "Switch Knob Part 1 of 2 for Floor Lamp" is the cap for this part.

3D printing settings

You should print this with 1.5 mm filament.

Print both parts for this project (1 of 2 and 2 of 2).

Unscrew the nut that retains the lamp's on/off switch. Put part 2 of 2 into the plastic lamp on/off switch. Replace the nut on the lamp Γ’β‚¬β€œ this holds on part 2 of 2. Place part 1 of 2 onto part 2 of 2.

Tolerances should allow for both parts to have a tight fit. However some sanding or reaming may be needed to get the parts to fit together.

The Switch Knob Part 1 of 2 for Floor Lamp part may have to be epoxied to Switch Knob Part 2 of 2 for Floor Lamp. Use plumbers two part epoxy putty if the space between both parts is too great after sanding. Five minute epoxy dried overnight should glue part 1 of 2 and 2 of 2 together well.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.