"Pende" Lamp Shade

"Pende" means "Five" in Greek.

It is the third design in the Fos collection of vase mode Platonic and Archamiodian solid products.

This range features bold forms, strong lines and interesting light gradient effects.

With no support material it is quick, easy to get great results and won’t break the bank in material costs.

There are 2 sizes of files included in this download. See dimensions in print settings for print bed compatability.

This product has been designed for an E26 + E27 lampholder [40mm Diameter, IKEA hanging lampholder compatible] if you can't find one of those let us know and we can supply you with an adapter plate/alter the design.

We printed this design with Pearl White PLA.

We have tested this product with a 13W light bulb and there has been no deformation of the PLA. If you use PLA we wouldn't recommend going much higher than this because of the mostly enclosed design.

To print this design we used a Creality CR10 Pro and the prints in the photos are printed with a 0.8mm nozzle [0.6mm compatible].

This design pushes overhang printing a little, so do not print with larger layer heights than those suggested, to ensure uniform good print quality.

Layer Height
Small: 0.1mm- 0.2mm
Large: 0.1mm - 0.25mm

Infill: 0%

Brim: Yes

Raft: No

Speed: 55mm/s

Post processing: No

Dimensions
Small: 190mm x 200mm x 156mm
Large: 276mm x 290mm x 228mm

Time to Print
Small: 7 hours 40 minutes
Large: 12 hours 40 minutes

Material Usage
Small: 103g
Large: 225g

Notes: Remember to select vase mode in your slicer (this is called spiralize outer contour in Cura)