Panda Bin Interchangeable heads

Panda garbage can, three modules with interchangeable heads. More head designs will be coming soon.

This wastebasket is designed to be sturdy, a small desktop wastebasket, designed to print with four wall perimeters on each of its pieces.

It is scalable!!! Although I do not recommend scaling to a size less than 50% to have sufficient robustness in the materials.

There are three elements, the hub, the head support, and the interchangeable head. These modular heads will be upgraded over time. This is the first version of many well-known anime animals and characters!

The cube is printed on site, the other two pieces are not. It is recommended to orient the panda head with the ears touching the printing plate, and the upper head support, with slight tilt and supports to have a good result.

IMPORTANT NOTE. Please note that the design of these models requires time, testing and prototyping until you get the final version, and the price is low enough to support the creation. If you have any suggestions for a specific topic, please feel free to contact me via social networks.

If you want to sell my prints, you can get a commercial license as long as you have an active Patreon subscription https://www.patreon.com/sheikoner

4 perimeters, 4 wall count lines to give robustness to the model.

Typical print parameters.

I printed it at a layer height of 0.28 with 0.4 nozzle.