Gran Teatro Falla Acronyms Carnival of Cadiz

As passionate about the Carnival of Cadiz we decided to make our own decorative trophy of the acronym of the Gran Teatro Falla (GTF) although actually the origin was FTG, Fiestas Típicas Gaditanas.

Print-in-place ⭐⭐⭐⭐⭐

IMPORTANT NOTE:

If you want to legally sell 3D prints based on my designs, become a Patreon on my page:

www.patreon.com/candil_deco_3D

All my designs are covered by a Creative Commons non-commercial license. The sale of prints using my designs are the sole right of myself, the designer, and my active Patreons to do so. Please understand each design are days of work and multiple prototype prints to ensure quality.

If you print it, don't forget to show it to me with a " Make " =D

To get the most out of the STL file, follow these guidelines:

• If you need support for "F" joints. Everything is Print-in-Place.

• Layer height 0.2mm

• Nozzle 0.4mm

• Recommended filler 10%.

• Recommended fill pattern: Grid

• Prepare and clean your bed for excellent adhesion.

• Do not print faster than 50 mm/s. A lower speed such as 40 or even 30 mm/s will always produce better results.

• Make sure your bed is properly leveled.

• Make sure that the print and bed temperatures are suitable for the filament you will be using.

The image print is made with the filament:

ICE Filament Pla, 1.75mm, 0.75 kg, Groovy Gold

Link to amazon: https://amzn.to/3uCLXc5