3D Printable Token, Dice and Card Storage Box STL to suit MCP etc.
$4.95 3D Printable Token, Dice and Card Storage Box STL to suit MCP etc.
3D
NOW WITH A SCALE FINDER! This prints well on many printers at the default scaling but some people find that scaling anywhere from e.g. 97-103% works better for them. Rather than printing the whole box, just print the scale finder and test fit your tokens - adjust to suit - then away you go!
This is a 3D printable STL for a card, token and dice box to suit the Marvel Crisis Protocol core set.
It is ready to magnetise with up to four 5x1mm magnets. If you do magnetise, try adding them in one pair at a time to make sure you don't make the lid too difficult to get off.
No physical product is provided! You only get a STL and you will need a 3D printer to make it. It's designed to fit on a 250x200mm or larger bed (Creality CR-10, Prusa/Prusa clones etc.)
Base dimensions: 243x196.2x30.9mm
Lid dimensions: 243x196.2x30.9mm (not a typo, they're the same footprint/height)
No supports required. No tokens/dice/cards etc. included.
| Status | Approved |
| Price | $4.95 |
| Dimensions | 243 x 196.2 x 30.9 |
| Support Free | YES |