Toyota Yaris 3rd gen headlight fix projector prefacelift

The pre-facelift third-generation Toyota Yaris Hybrid has headlights based on HIR2 lamps, which generally won't be as useful on secondary roads due to their narrow beam pattern, even with rear-marked LED bulbs.

This model kit allows you to install the 3-inch Synolyn H1 projector kit found at these links:

Aliexpress link

Link from archive.org

This projector kit provides a final solution to the lighting problems of the pre-facelift third-generation Toyota Yaris Hybrid.

All the printable parts you need are included ,but besides that, M4x25 bolts and M4 self-locking nuts (available at your average hardware store near you) will be needed, and some cutouts will be needed on the projector as one of the mounting holes interferes with mounting on the headlight.

Of course, you can edit the mount to use any other 3-inch projector you find on the internet, especially if you opt for a hyperboloid Bi-LED projector, so it can be considered a universal mount.

A lower mirror mount is included which will only provide the aesthetic effect of not leaving a huge hole under the projector. It will not disturb oncoming drivers or aid in the illumination of the headlight, making it optically neutral.

Last but not least, I've included a ring that can be printed in black for an unobtrusive appearance, or can be chrome plated for an even more OEM look. Just keep in mind that the OEM projector is 3.5 inches, so if you don't print the ring, the screws will be visible from the outside.

**Private license, but a commercial license can be sold separately at a higher price.

DISCLAIMER: This will require advanced modification of the headlight unit, including some surge protection for new projectors available from OEM projectors, and removal and reinstallation of the clear lens. I will not be responsible for any damage.

The 3rd Gen Toyota Yaris Hybrid has HIR2 lamp based headlights that typically won't be all that useful on secondary roads due to its narrow beam pattern, even with aftermarked LED bulbs.

This model kit allow you to install the Synolyn H1 3 inch projector kit Aliexpress link

Archive link so you can fix the problem at the root, where an H1 LED bulb will give you a nice wide beam pattern.

It should include all the printable parts you should need, but on top of that, M4x25 bolts and M4 self locking nuts will be needed (available at your average hardware store nearby), and some trimming will be needed on the projector as one of the mounting holes interferes with the mount in the headlight.

Of course, you can just edit the mount to use any other 3 inch projector you find online, especially if you go for a hyperboloid Bi-LED projector, so this can be thought as an universal mount.

Last but not least, i've included a ring that you can print in black for a stealth look, or you can chrome for an even more OEM look. Just bear in mind that the OEM projector is 3.5 inch, so if you don't print the ring, the hardware will be visible from the outside.

Commercial license available separately

DISCLAIMER: This will require advanced modification of the headlight unit, including some antisurge protection for the new projectors that can be harvested from the OEM projectors, and the removal and reinstall of the clear lens. I'll not be liable for any damages.

**Mandatory use of ABS, ASA, or any other filament that can withstand high temperatures.