Nightrider Holder

This is a holder to keep an Ambrosia Blucon Nightrider attached to a Freestyle Libre sensor.

I don't like wearing straps around my arm (like in this make (https://www.thingiverse.com/make:356361) ), but the Freestyle Libre adhesive tape holds very firmly to my skin, so I developed a holder, that attaches to the Libre between its adhesive tape and the sensor itself and is high enough to include the Nightrider.
As I wanted the whole thing being removeable for taking a shower, going to the pool etc., I had to design it wide enough to get the Nightrider falling out again, and the frame being removable by firmly holding the Libre to the skin while pulling the frame off.

Update 04.04.2018: Nyemrinju (https://www.thingiverse.com/Nyemrinju/about) submitted his improved version with a 4-way clip. Thank you, Nyemrinju, for contributing this. If you are interested in downloading his version, please pick the 2 Files with "Nyemrinju" in the file names.

I am currently working on a smoother and more reliably printing version, which should be released soon as well.

You may download and print this for yourself and others, but you may NOT sell the prints. I would be happy, if you leave a make or a note, if you like and use it.

Update 29.04.2018: I uploaded a slightly improved version 1.1. This new version has a more reliably printing snap in to the libre sensor and 4 holes to be usable with Nyemrinju's clip. Also the new version has a much more rounded bottom for a better wearing comfort. Please download the Holder_v1.1 file together with the Clip_v1.0 or Nyemrinju's Clip.

Update 20.07.2018: I uploaded a slightly improved version 1.1. of the clip. Some users had reported, that their clip slips off the holder to easily, so I modified it. Version 1.1 is slightly shorter and has bigger noses, but due to their size, they need to be printed with support now.

-