MINI Hot Air Balloon Lamp

MINI Hot Air Balloon Lamp (FOR SMALLER 3D PRINTERS)
Minimum Build Plate size needed 170x170x161 (mm)

(THIS MODEL IS ALSO AVAILABLE IN A BIGGER SIZE)

START UP VERSION (with segments Option 1)

NOTE: The Commercial license for this product is available on request for selected customers please contact me for more information on: fulv@me.com
thanks :)

This is a great smaller model that can also be used as a Lamp.
The details of the light bulb I have used are in the pdf documents provided.

I have designed 3 different balloon segments options (1-2-3) to give you the biggest choice of colors possible. (see MINI BUNDLE Package).

The START UP Model comes with Segments Option 1 and all the universal parts that will work with all the options.

Please take a look at the optional ADD ON versions available to download from my profile page.
The difference is only in the segments that makes the balloon.
There is also a BUNDLE Package available if you want all choices.

In all the versions you can print the balloon segments parts in VASE mode (Pdf document provided with all the details).
As always, all the parts are printable without any support material and no need for painting.

Full assembly instructions included!

All you need is a bit of glue.
I have used NANO GLOOP for PLA and it worked beautifully well with no mess or fingers glued together.

If you click on this link below and use the code ''FULV'' you will automatedly get a 10% discount on your order.
I would recommend purchasing a couple of the NANO bottles which will be plenty for this model.

https://www.3dgloop.com/?partner=FULV

Use your imagination, use the colors that you like the most and make it yours.
It prints and goes together very easily.

Model size fully assembled:
Diameter 172.5mm (6.8in) x 345mm (13.6in)
If you have any questions, please do not hesitate to contact me and I will be more than happy to help you.

Fulv :)
fulv@me.com

FOR THE LIGHTING:

The model has been designed to incorporate a USB small light bulb like Toolmoon with a vertical connection.
But any small lights will work very well

The MALE SCREW BASE part is available in 3 versions, choose the one you need for the light you are planning of using:

MALE SCREW BASE for ToolMoon Light Bulb
MALE SCRE BASE 27mm HOLE
MALE SCREW BASE 30mm HOLE

The wires can be directed out of the model via the cut out at the back of the Cloud Base.

All the parts in the pictures have been printed at 0.2mm layer height.
Except for the Cloud base where I have used adaptive layers in Prusa Slicer.
All the Balloon Segments have been printed in VASE mode. Details instruction PDF document included in the zipped file.
Filament of choice:
Polyterra PLA
PolyLite PETG Transparent (for the transparent parts). You can use any transparent or translucent PLA too).
Pdf documents with the list of colours used provided in the zipped file.

Slicer:
CURA
Prusa Slicer

You can print the PDF document scale 1:1 on an A4 printer to help you with everything, VERY EASY I promise.
The longest print is the Cloud Base if printed with adaptive layers, about 8 hours at 30mm/s speed). If The same part is printed with 0.2mm layer height it will take less time.
All the other parts take much less time.
If your printer has a build plate no smaller than 170mm x 170mm x 161mm you can print all the parts as they are.