8 Bit Shutter Shades Retro Sunglasses 1980s Gamer Costume

This one's for all you 1980s retro gamers (like me!) these super cool shutter shades are pixelated like all your favorite old-school video games for Atari, Nintendo, Gameboy, and more. And if you ever need sunglasses for an '80s costume, these are definitely it.

Best of all, you can print them in three sizes:

Kid's Small - 125mm Frames with 125mm Arms
Women's Medium - 133mm Frames with 135mm Arms
Men's Large - 141mm Frames with 145mm Arms

You can also mix the arm lengths and frame widths to get the perfect size for your noggin'. I chose to make multiple sizes, rather than making you guys scale them. If they don't scale properly, the pegs on the arms may not fit the holes on the frames as well. At their current scale, the pegs snap right in and the hinges are just tight enough to open and close smoothly, without being not too loose.

PARTS & ASSEMBLY
Each size frame is neatly packed into its own folder within the zip file. Choose the size you want to print, and within you'll find 4 files:

Left Arm
Right Arm
Frames
Blocks

Important Notes: The blocks are the same in each folder. Only the arms and frames are different sizes. Also, the file "8Bit Shades - WHOLE" is for Cults3D display purposes only, and is not meant to be printed.

To assemble the glass, simply line up the pegs on each arm with the hole on the frames. Then press the blocks into the shutters. See the images above for the proper placement of the blocks.

If you like the 8-Bit Gamers Shutter Shades, please check out our ever-growing portfolio of STL models.

• https://www.cults3d.com/en/users/GetPrinted3D/creations

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial License to legally sell our designs here:
- https://www.patreon.com/GetPrinted3D

The frames and blocks print flat on the build plate and do not require any supports, brim, or raft. Basic settings will do. However, the Arms will require supports.

Frames & Blocks
Layer Quality: 0.2
Infill: 15%
Speed: 80mm/s
Supports: No
Build Plate Adhesion: No

Left & Right Arms
Layer Quality: 0.2
Infill: 15%
Speed: 60mm/s
Supports: Yes
Build Plate Adhesion: No