Apple Fanboy (Updated - 2 main parts)

This is an updated (easier to print, corrected for better tolerances, more stable for larger phones and accounts for the small size difference for the Apple Watch Series 4) version of my original design for a combination iPhone/ Apple Watch/ AirPods charger (you can find the original here: https://www.thingiverse.com/thing:2747867)

I haver also designed a 3-coil version but the 3-coil Qi PCB I originally bought from Amazon is no longer available. I'll continue to try to source it and will eventually post it if I find it.

In this version I separated the main body from the base for easier post-processing and for allowing interesting two-color combinations (either by printing in different materials or painting the parts different colors).

Enjoy!

I’d appreciate your support with a small $3 donation so I can continue designing and sharing models here! https://ko-fi.com/fanboy

The iPhone charger is Wireless (Qi) using the dyi Qi part you can find here: https://www.amazon.com/gp/product/B073W7P5T8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You'll also need a micro-USB cable with a slim connector. I bought these, also from Amazon: https://www.amazon.com/gp/product/B01M0LK2SK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

It uses a standard Apple Lightning cable for the AirPods charging part and a standard Apple Watch charging puck for the Apple Watch.

I highly recommend printing with the highest resolution available as I designed it with tight tolerances for a good finish.

The screw holes are small to allow for drilling/adapting to whatever screws you want to use. I am using flat-head M1 torx screws.

The photos here are of the one I made and I spent a lot of time on post-processing (sand-blasting with glass beads, sanding and painting).

I braided the 3 cables to make it tidier.

Enjoy!

Malencar

-