cinelog35 1 axis gimbal

The DJI avata shows up with a new feature in the cinewhoop world. A single axis gimbal seemes not so usable at first but when ure flying and need to see below or above your drone the gimbal seames prety useful. for me the most important case to have a gimbal is when u need to change velocity in mid air since the speed of the fpv drone is linked to the camera angle.
a drone as versatile as the cinelog 35 should have a simple mechanism like this. So I did it.
in this case is for analog version and the FPV camera have 19mmx19mm and i used the m2 screws to fix the axis of the camera in the mounting holes of it, I am current working in an O3 version without the thumb pro. but is difficult without having the equipment in hands. with my atual configuration in 3 blades prop i have 11 minutes of flight time indoor and 5 outdoor (flying verry fast) with 6s 1300mAh CNHL battery

Video of it working:
https://youtu.be/3rHbmajtxx8
.
.
.

About the DJI O3 version you can contact me im my intagram for colaboration
https://instagram.com/matheusmilonas?igshid=Mzc0YWU1OWY=

ABS - 245°C
support and raft
solid model for more strength with 3 perimeters

servo - MG90S

As shown in the technical drawing, the length of the metal that goes from the servo to the camera has to be exactly 32.3mm

solder on LED pin in the flight controler