Kawasaki Ninja 400 Tail Tidy

Created a Tail Tidy for the Ninja 400. I made it with the dimensions from my personal bike which is a 2022 Ninja 400 base, non ABS. Not 100% sure if it will fit the ABS and KRT editions, or all year models of 400, but it probably should :) Printed with 100% infill to make sure it is sturdy enough to handle all of the G's the 400 pulls haha. Has inserts for 10mm nuts to fit securely and not spin when tightened down. The factory mounting hardware has hex bolts that screw into the OEM bracket and will need to be replaced with 10mm nuts and bolts, but retains the factory turn signals and license plate light and their respective hardware. I used lock washers and Loctite on the bolts to make sure they don't come loose. I also made a gasket to go between the bracket and bike that I printed with TPU to make a little bit of vibration dampening. There are plenty of installation videos on YouTube of similar items if you need help with the install.

EDIT 04/17/2022

I designed the original tail tidy based off of the specs from the OE bracket that comes on the bike, along with the temporary tag the dealership gave me. I realized once the actual license plate came in the mail that the sides of the bracket stick out and looks weird to me. I have added a 2nd design that makes the bracket a little smaller to not stick out past the plate. This new design is to fit a North Carolina motorcycle license plate, not 100% sure if all states are the same size lol.

-