5-5-2024
Mag catch bar Partisan version added
4 -5-2024
stingray mag catches file cleaned up.
M1D Left side export error fixed
UNW trigger model have been added
2-5-2024 stingray mag catch bars added
the BIG 2024 project update status: complete
Parts: all parts are updated
manuals : all manuals have been updated
the parts list can be found here
https://drive.google.com/drive/folders/1XBZvTm_s3VLk_iqTnINIyMt30BXmXn8h
A BIG 2024 project update is a view weeks away!!!
so my recommendation is to put your build on hold.
Barrel / UNW hop up unit will be updated
Bolts will be updated
bolt front caps
internal pars will be updated
and the manual
why? Better FPS/joule out putt
a more easy and relabel build
better nozzle support
nozzle spring guide (is all ready a beta thing)
For beta user keep in mind that Iβm working and testing parts that are newer then the beta parts.
When this update is done and itβs confirmed that it is good update. Then there will be 2 alternate models added over time. The stingray, and partisan 6 edition of this project. In a H and BL version
5-3-2024
(cults3d note, at the moment Iβm working on a lot of improvements so keep a eye on the discord and printbels for some bata parts. After that is closed the cults3d version will be fully updated)
to day I discovered that I made a error with the nozzle spring placement. so even do the spring guide helps. do I recommend to reprint the bolt front! to prevent nozzle spring damage
also I have added support for the WE / AW G18 nozzle
the TM model is still a work in progress
Β
ββββββββββββββββ
ID 13,70mm pistonβ β options
ββββββββββββββββ
supported nozzles for bolt front model: KJW PK13 17Β
KJW KP13 , KJW KP13c,β β KJW KP17,Β
supported nozzles for bolt front model: G 17 WE AWΒ
WE G 17, WE, G 19, WE G 27, WE G 34,Β
AW VX01, AW VX0100, AW VX0101, AW VX0111, AW VX7, AW VX9,Β
G-force 17, G-force 19,Β
supported nozzles for bolt front model: G 18 WE AWΒ
WE G 18c, WE G 23, WE G 26,Β
AW VX02, AW, AW VX0200, AW VX0201, VX0210, AW VX0211, AW VX8,β βΒ
G-force 18c,Β
ββββββββββββββββ
ID 13.40mm piston optionsβ β .Β
ββββββββββββββββ
supported nozzles for bolt front model: TM G 17
TM G 17, TM G 19, TM G 22, TM G 26. TM G 34, (gen 3βs)βΒ
16-12-2023
bolt fronts with spring guide have been added
https://youtu.be/Z7I6xw9x5wM
and the extended charging handle bushings for MKII users that was made for the FA models in case you prefer that model.
13-12-2023
the H lower to H upper disconnect have been updated I made a error that is now fixed
11-12-2023 Lockpin / project streamlining update
the lowers
have been switched for the H model lower.
These can be used for FA, BL and H models.
In case for old FA uses: unless you are happy with the way it functions now. Then you would have to switch over to the new lower, there was no other way around it . Or use a old BL lower or H upper if you happen to have a one extra
the uppers (not jet uploaded)
the uppers have been updated to the H styled disconnect cut model
and a UNW hopup cut out have been applied.
In case for old FA uses: itβs not necessary to reprint the upper, but you do need to manually make the space for the disconnect lager. This not a hard thing to do. Itβs explained in the FGC-6 H how to build manual what needs to be done (will be later added in the BL PDF as well
https://drive.google.com/drive/folders/1XBZvTm_s3VLk_iqTnINIyMt30BXmXn8h (page 30)
the disconnects
are updated to work with the new Lock pin fire assembly that are at the moment a separate beta.
https://www.printables.com/model/677379-fgc-6-fa-locked-fire-pin-beta-set-set-gbb-airsoft-
In case for old FA uses: Keep in mind that the disconnect part need to be chanced in case you want to try out the new Lock pin fire assembly. And since itβs harder to update the old BL lowers did I made a BL lower to H upper disconnect option
Bolts
the bolts are now lock pin ready, besides that there are no big updates made on them.
Bolt fronts
they have been updated to work with the new UNW hop up unit (beta)
https://www.printables.com/model/670322-fgc-6-unw-hop-up-unit-beta-version
Update: 10-3-2023
anarchy lowers have been added
update: 12-08-2023
roller bearing hammer have been added
-
Update: 1-9-2023
manual updates
3-9-2023
trigger part improved (less clean up for spring)
-
16-9-2023β¨trigger update (old one works fine, just a ease of install update)β¨β¨
stock MKII shroud and rail added
5-10-2023
PDF's updated
-
12-10-2023
new V2 hammer added. improvements are tested on the SF and should also be better on H and BL models. but I leave the old model in te set just in case you find it a better model
-
13-10-2023
new v3 hammer added this one is definitely a replacement for the gen 1 hammer. but I will explain the difference in a video so you can see what the V1 , v2 v3 is all about
-
the FGC-6BL is here making this the first hammer fired semi auto GBB FGC-9 airsoft replica to be released. there will be later also a FGC-6H this will be the 1 on 1 replica in function and handling from the FGC-9. but the BL is very close to this as well the only difference is that the bolt will be partly open when the last round have been fired.
I canβt make any guarantees of course since the FGC-6H is not finished but the idea is that you only need to reprint the BOLT, HAMMER, and some small disconnect parts to switch between the FGC-6BL and the FGC-6H
this kit comes with a lot of options! so read the PDFβs well before you start so you know what to select to print and buy.
this project have been tested with green gas, red gas and HPA and it got a working range with the current springs of 80/90 up to 140 Psi on HPA.
look for shrouds and stock in the FGC-6BL MKI or MKI collections
FGC-6BL MKII links
https://www.printables.com/social/180009-untangleworks/collections/492099
FGC-6BL MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/492098
the advanced parts will be released in a separate package. note: only use them as fine tuning and experiment parts! your FGC-6BL should work with the parts provided in this starter kit.
movie link:
https://youtu.be/RN40G9kLlGs
FGC-6 H FA: why and how to use the upper sand tool
https://youtu.be/-QtMWLSduyY
hop up assembly
https://youtu.be/Lk3ifY9NuhU