Spaceship

A 1/300 scale model of a spaceship (for 6mm) with about forty parts.

Of course you can change the scale.

The ship can carry various containers, one for troop landing, another for transport.

The containers are inserted into the middle of the ship from above.

Use 1.75mm wire for the axes of the landing container doors. To insert in the center of the vessel, turn the doors all the way down.

As the ship is modular, you can print several times a certain part to enlarge the ship, or you can print several times a certain part to enlarge the ship.

make a base or an automatic cargo ship by combining parts in other ways

.

Another of my ships

I'll add containers and other features in the future

EDIT; I'm adding a cockpit with slots for portholes, with the cockpit and pilots and windows inside.

Either print the windows with a transparent material, or cut a transparent plastic wrapping using the template to cut the windows.

It's all cockpit2 files...

EDIT2 :I'm adding 3 weapons turrets that can be mounted in the octahedron holes - they're able to rotate,

To mount the armament, glue the washer around the axle, pass the axle through the hole in the square support and then glue the turret to the axle. The turret and axle must rotate freely around the support.

Don't forget to post a make, I'm curious to see your creations.

Printed in layers of 0.3mm or less.

I didn't need any support.

Put a brim for printing, octahedrons and the shipping container.