Wacom Style Digital Pen Holder for Tablets

A Digital Pen Stand for Wacom,Huion,X-Pen and personal tablets to prevent the pen from continually rolling all over the table.... It has a sunken cavity at the bottom to prevent the Digital Pen tip from remaining pressed down during rest... you can close to fill the inside with plaster or cement to increase the weight (not necessary to make it stable) or leave it as is.... There are 2 .CTB files ready to print on a Phrozen Sonic Mini 4K: **Wacom-penholder * is the penholder plus a penholder version (Wacom-penholder_hole) hollowed out at the top back if you want to print it transparent and fill it with any substance of your choice, from shiny stars to any liquid color or color paint.... You can also do it with the Wacom-penholder file, but if you plan to use liquids, it is much easier to first glue the lid on the bottom, then fill it with a syringe and close it with the small circle to be printed with the Wacom-version penholder_hole.... I used ANYCUBIC Basic resin and SUNLU Clear transparent at a layer height of 0.03 with no difference in settings and exposure, so you can do both just by changing (and cleaning the tray) the resin... there are a couple of images in the photo section where you can see the resin spend, weight and print duration.... In *MODELS *.RAR there are five formats of the same 3D models if you want to try your own configuration: .STL, .OBJ, .DAE, .PLY and *.FBX

Phrozen sonic mini 4K-Anycubic Basic Resin

Layer :0.03

Exposure:2.8

Retract:150

Light-off:9/9

Print Time:6 H 36 m