Smallest RC airplane "small catfish

Functional model (RC airplane):

This is an airplane, what every maker can reprint himself. The plane has flight characteristics like a real WWII plane. Even in flight, the silhouette looks like a real WWII plane.

The flight feel is excellent as the aircraft is flown without stabilizers by default. So even professional model pilots will not get bored.

This is not an original aircraft! This is an own creation.

Assembly for beginners.

Well explained assembly instructions are included! The instructions include the hints for successful printing.

Details:

Dimensions: (HxLxW) 80 mm x 380 mm x 550 mm

Span: 550 mm

Weight: 125 g without LiPo (with normal PLA and TPU).

Battery configuration (LiPo): 2s

Required tools:

-Printer: 0.2 mm and 0.4 mm nozzle

-Material: TPU and PLA / LW PLA

-Tools:pliers, lighter, super glue, UHU Por

-Engineering needed:2x Ultra Micro Servo, 1x Hacker A05 10S kv4200, 1x GWS Prop 3 x 3 HD, Brushless controller with BEC Brushless controller with BEC.

-Materials: heat shrink tubing, 0.8 mm spring steel wire, M2 screws M2 screws.

Contents:

1x Manual (German/ English)

1x all .stl files

All EXAPUR designs are protected by copyright law.

Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute these digital files in any way. This includes modified or "remixed" versions of the designs. Hard copies of the design may not be sold without permission.

A 0.2 mm nozzle is required for all PLA parts. Please make sure to use a slow

and separate printing of the PLA parts. Some PLA parts are included as solids.

Set your slicer to set the fill to 0% and the wall thickness to 0.4 mm.

The bottom and should have a minimum thickness of 0.4 mm, but better is 0.6

0.8 mm.

The TPU

parts should have at least 1.2 mm walls. The bottom and roof thickness

should be 1 mm.

Everything is printed without support structure!